Hallo,
nachdem das Remastern geklappt hat und ich jetzt von dem ISO starte, kann ich keine Konsole mehr öffnen und bekomme diese Fehlermeldung:
Laut dieser Anleitung http://www.knoppix.net/wiki/Knoppix_..._may_be_neededKonsole kann kein PTY Öffnen. Dies liegt wahrscheinlich an einem Fehler in der Einrichtung der PTY-Geräte. Konsole benötigt Lese- und Schreibzugriff auf die PTY- Geräte.
Aber wo ändere ich das???Leah 21:52, 11 Nov 2005 (GMT) I found that for some reason the permissions on /dev/pty were not being set to writable, so you couldn't open a konsole session on a new remaster, as it needs users to be able to access the pty's. I recommend making this change to the </path/to/develsystem>KNOPPIX.build/Knoppix.clean script as well, just in case. Change the (backslashes wrapping text here not present in script) line:
chmod 666 /dev/ttyp* /dev/sg* /dev/audio* \
/dev/dsp* /dev/mixer* /dev/sequencer*
to
chmod 666 /dev/pty* /dev/ttyp* /dev/sg* /dev/audio* \
/dev/dsp* /dev/mixer* /dev/sequencer* /dev/null
Gruß
Smokyjoe
[/url][/quote]
Apple Xserve A1009 14-Bay RAID Network Storage Array Enclosure
$249.99
Oracle 7085209 LSI MegaRAID SAS 9361-8i 1GB Cache 12Gbps SAS/SATA PCIe RAID Card
$28.20
Broadcom LSI 9400-16i Raid card SAS/SATA/NVME SFF-8643 SAS3416 PCIe 3.1 x8 HBA
$155.12
Dell R630 1U Server w/ E5-2630v3, 64 RAM, No RAID
$170.00
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$86.99
Inspur LSI YZCA-00424-101 Raid Card 12Gbps HBA Controller Low Profile 9300-8i IT
$15.98
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
Lenovo 930-16i PCIe SAS RAID Controller FRU P/N: 01KN508 Tested Working
$149.99
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$55.45