I have exactly the same problem with Asuscom P-IN100.Some advices?Originally Posted by GdB
Hi all,
I do not succeed in configuring ISDN with Knoppix 3.2. It does work under my SuSE 8.0.
I can see my ISDN-Card with cat /proc/pci.
When I use 'configure ISDN' I get the Red Hat ISDN configurator: I choose my card (ASUS COM ISDNlink), and set the IRQ and the IO as I saw it in /proc/pci. Then I create my provider entry, fill in everything I know, and activate it. However, as soon as I do that, the button 'connect' is greyed out.
When I look into 'dmesg', I see the the hisax module is thrown out, exactly at that moment. If I issue 'modprobe hisax' it is loaded again, I can press the button 'connect', however it immediately returns the error that it cannot connect to the provider (it is so fast it seems that it even did not try to dial...).
When I look again in dmesg, I see the following:
CSLIP: code copyright 1989 Regents of the University of California
ISDN subsystem Rev: 1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1 loaded
HiSax: Linux Driver for passive ISDN cards
HiSax: Version 3.5 (module)
HiSax: Layer1 Revision 1.1.4.1
HiSax: Layer2 Revision 1.1.4.1
HiSax: TeiMgr Revision 1.1.4.1
HiSax: Layer3 Revision 1.1.4.1
HiSax: LinkLayer Revision 1.1.4.1
HiSax: Total 1 card defined
HiSax: Card 1 Protocol EDSS1 Id=HiSax (0)
HiSax: Asuscom ISDNLink driver Rev. 1.1.4.1
ISDNLink: defined at 0xec00 IRQ 11
ISDNLink: ISAC version ( 8 ): 2086/2186 V1.1
ISDNLink: HSCX version A: A1 B: A1
ISDNLink: wrong HSCX versions check IO address
HiSax: Card ISDNLink not installed !
ISDN-subsystem unloaded
However my IO address is exactly as I saw it under /proc/pci, and also exactly as it works under SuSE. What is going wrong?
GdB
I have exactly the same problem with Asuscom P-IN100.Some advices?Originally Posted by GdB
Hei GdB
Sorry I can't help you with the problem you have with the Asus card, but would like you to know that the Billion HFC-PCI card sets up effortlessly with isdn-config..
regards
Hi Cintra/Boombastic,
Sorry, I totally forgot this thread (look at it, my last posting is one year old!)
I solved the problem: because it is a PCI card is was automatically configured, but for some reason with the wrong type. So what I did is throwing out the hisax module, and load it again with the right parameter:
rmmod hisax
modprobe hisax type=35
modprobe isdn
/etc/init.d/isdn start
Then dial and go...
Be sure you take the right type!
HTH,
GdB
Lenovo Legion Pro 7i 16" WQXGA 240Hz Gaming Laptop i9-14900HX 16GB RAM RTX 4080
$37.98
Lenovo ThinkBook 15 Gen 4 Notebook 15.6" FHD AMD R7 5825U 16GB RAM 512GB SSD
$39.33
15.6" Lenovo ThinkPad Laptop PC: Intel i5 16GB RAM 512 SSD Windows 10 Webcam
$279.99
Lenovo ThinkBook 15 Gen 4 Notebook 15.6" FHD AMD R7 5825U 16GB RAM 512GB SSD
$479.99
Lenovo LOQ 15.6" FHD 144Hz Gaming Laptop i5-12450HX 12GB RAM 512GB SSD RTX 3050
$599.99
Lenovo ThinkBook 15 Gen 4 Notebook 15.6" FHD Intel Core i7-1255U 8GB RAM
$514.99
Lenovo Ideapad 1 15Iau7 15.6" Laptop Intel Core i5-1235U 8GB RAM 512GB SSD W11P
$309.99
Lenovo Yoga (Silver) 730-13IKB 13" i5-8250U, 1.8GHz 256GB SSD 8GB RAM Win 11
$100.00
Lenovo ThinkPad L14 14” FHD Laptop AMD Ryzen 5 PRO 16GB RAM 512GB SSD Windows 10
$229.99
Lenovo ThinkPad E, AMD, 8GB RAM, 256GB SSD, No OS, 20T80005US
$280.00