hello all,
i have recently installed knoppix onto my tecra 520cdt, it sports a 20gb HD ,160Mb, 166Mhz MMX CPU and DVD drive. The live CD enabled DMA, but then rebooting from the HD install the DMA has been turned off? any ideas where this should be enabled?
also when in the KDE desktop the HDA1 (8Gb) will not mount properly and shows read only, but my other partitions HDA3 (5GB) and HDA4 (5Gb) are accessible and RW is enabled BTW(HDA2 is my swap 2Gb)
any ideas?
i assume i edit the HDParm area? or in bootmisc.sh
thanks
Dell PowerEdge R730 2x E5-2699V3 2.3Ghz 36 Core 128GB RAM H730 X520-I350 2x750W
$329.99
DELL R630 SERVER 8 x 2.5'' 2X E5-2680V4 32GB RAM IDRAC ENT & NDC 2X 495W PSU
$169.95
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays
$159.99
Dell PowerEdge T420 2x Xeon E5-2430 V2 2.50GHZ 32GB DDR3-1600MHZ 2x 550W PSU
$149.95
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD
$197.99
Dell PowerEdge R620 Server - 256GB RAM, 2x8cCPU, 120Gb SSD/3x900Gb SAS, Proxmox
$320.00
DELL PowerEdge R730 Server 2x E5-2697v4 2.3GHz =36 Cores 128GB H730 4xRJ45
$461.00
Dell Poweredge R440 2x Xeon Silver 4110 SR3GH 32GB RAM No Drives Server
$349.99