hello all,
i have recently installed knoppix onto my tecra 520cdt, it sports a 20gb HD ,160Mb, 166Mhz MMX CPU and DVD drive. The live CD enabled DMA, but then rebooting from the HD install the DMA has been turned off? any ideas where this should be enabled?
also when in the KDE desktop the HDA1 (8Gb) will not mount properly and shows read only, but my other partitions HDA3 (5GB) and HDA4 (5Gb) are accessible and RW is enabled BTW(HDA2 is my swap 2Gb)
any ideas?
i assume i edit the HDParm area? or in bootmisc.sh
thanks
Dell PowerEdge R730 2x E5-2699V3 2.3Ghz 36 Core 128GB RAM H730 X520-I350 2x750W
$329.99
Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config
$477.99
Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays
$159.99
DELL PowerEdge R630 8SFF Server 2x E5-2690v4 2.6GHz =28 Cores 256GB H730 4xRJ45
$562.00
Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD
$197.99
DELL R630 SERVER 8 x 2.5'' 2X E5-2680V4 32GB RAM IDRAC ENT & NDC 2X 495W PSU
$174.95
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 240GB SSD 2x 10GBE
$259.00
Dell PowerEdge R730 Server 2x E5-2680 V4 = 28 Cores H730 32GB RAM 8x trays
$356.99