-
Knoppix Commands
Hi to all the learned knoppix folk
I am at a loss at what to do next. ( I am a learner)
I have a HP Compaq Presario V5104 AMD Laptop with a Mobile Sempron Chip Set ATI Radeon Graphics card 160 Hd with 2 Gig of Memory
I have loaded the Knoppix 6 Live Cd and DVD at seperate occasions
I am trying to use the knoppix boot commands when the cd or dvd boots up
I have partitioned my laptop I have WindozeXp on 30 GiG Partition & the rest is partitioned with ext2
I would dearly love to run this Knoppix Live Cd/DvD with the toram command but it doesn't work
/init line 206 toram not found
init version 2.86
I have tried step by step the basic poor mans install.
I am sorry that doesn't work iether.
Where I am going wrong?
Help
Kind Regards
Geoff
-
Senior Member
registered user
Re: Knoppix Commands
Originally Posted by
Sologeoff
Hi to all the learned knoppix folk
I am at a loss at what to do next. ( I am a learner)
I have a HP Compaq Presario V5104 AMD Laptop with a Mobile Sempron Chip Set ATI Radeon Graphics card 160 Hd with 2 Gig of Memory
I have loaded the Knoppix 6 Live Cd and DVD at seperate occasions
I am trying to use the knoppix boot commands when the cd or dvd boots up
I have partitioned my laptop I have WindozeXp on 30 GiG Partition & the rest is partitioned with ext2
I would dearly love to run this Knoppix Live Cd/DvD with the toram command but it doesn't work
/init line 206 toram not found
init version 2.86
I have tried step by step the basic poor mans install.
I am sorry that doesn't work iether.
Where I am going wrong?
Help
Kind Regards
Geoff
Never use toram boot cheat code before on knoppix 6.
One question needs to be answered. Is it a CD or a DVD you are using?
If it is a DVD, then it makes sense since you have only 2G RAM and the DVD is around 4.5G in size.
However, if you are using CD, then it may mean that knoppix 6 no longer allow you to run toram.
Rgds,
Chip
-
toram crashed on me Compaq 5000 Knoppix 6.2. Locked up tight. 540 MB ram not enough? I dont recall the error message, but it appeared to be loading from CD to RAM, as the CD was running but no HDD activity.
-
Senior Member
registered user
wow, try to load a CD iso to 512M, short answer, NO 512M is NOT enough, the entire 700M of the CD have to reside in ram and it must have ram left to work with, q quick estimate would say 1G or more.
-
yes, on my flash installation with a few files added, its using 1.6 Gb so right, 512 isnt enough.
-
will All ubuntu commands work in knoppix?
-
Senior Member
registered user
if you are talking console commands most likely more than 90% will work, if you are uncertain try typing
to get a brief manual on the command in question.
Similar Threads
-
By HatGuy in forum General Support
Replies: 2
Last Post: 05-30-2007, 01:40 AM
-
By dan.g in forum Hardware & Booting
Replies: 0
Last Post: 03-30-2007, 09:10 PM
-
By pasi in forum Hardware & Booting
Replies: 2
Last Post: 06-07-2006, 04:02 PM
-
By section_8te in forum Hardware & Booting
Replies: 6
Last Post: 03-13-2005, 04:06 PM
-
By wingnut2292 in forum Customising & Remastering
Replies: 2
Last Post: 09-07-2004, 10:11 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
Crucial DDR3L 16GB 1600 2x 8GB PC3-12800 Laptop SODIMM Memory RAM PC3 16G DDR3
$22.45
Hynix 2x 8GB (16GB) PC4-19200 DDR4-2400MHz 288Pin Desktop Memory Module
$18.99
Team T-FORCE VULCAN Z 32GB (2 x 16GB) PC RAM DDR4 3200 (PC4 25600) Memory
$54.99
Micron 8GB DDR4 1Rx16 PC4-3200AA Laptop RAM Memory MTA4ATF1G64HZ-3G2E2
$10.00
Micron 16GB 2Rx8 PC4-2400T-SE1-11 Laptop Memory MTA16ATF2G64HZ-2G3E1 Tested
$17.99
SK Hynix 16GB 2Rx8 PC4-2400T-SE1-11 Laptop Memory HMA82GS6AFR8N-UH Tested
$17.99
A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G
$13.99
A-Tech 128GB 4x 32GB 2Rx4 PC4-19200R DDR4 2400 ECC REG RDIMM Server Memory RAM
$191.96
Dell SNPTP9W1C/16G 16 GB 2666MHz (PC4-2666) Memory Ram
$34.95