I had some initial difficulty booting from a Knoppix 4.0.2 CD and noticed that a number of other HP Pavillion users had similar problems. Here is what worked for me...
1. Held F9 during boot to set boot order to boot from CD-ROM drive first.
2. Inserted Knoppix CD into CD-ROM reader and continued to boot from CD.
3. Got to Knoppix home screen with 'boot:' prompt at bottom.
4. Hit return to continue with Knoppix boot but screen just went blank with no further CD-ROM or hard drive activity. Checked forums and decided I had problems with display of error message.
5. Shut down and started again by repeating steps 1 to 3 but this time I entered 'knoppix vga=0' after boot prompt and hit return. The Knoppix install continued and this time I saw the following error message:
'Kernel panic - not syncing: IO-APIC + timer doesn't work! [....] try booting with the 'noapic' option'
6. Shut down and repeated steps 1 to 3 again but this time I entered 'knoppix noapic' after boot prompt and hit return.
At this point Knoppix installed properly and all was well. Hope this helps others out there with similar problems.
JUNIPER ELECTRONICS NFX250-ATT-LS1
$250.00
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$29.91
Juniper EX3300-48P 48-Port 10/100/1000BASE-T (48 PoE+ ports) with 4 SFP+
$74.00
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$59.95
Juniper Networks SRX345 Gateway Appliance
$195.00
Juniper 48-Port PoE GbE Network Switch w/ 4-Port 10GB SFP+ Module EX4300-48P
$179.99
Juniper EX3400-48P 48-Ports PoE+ 4x SFP+ and 2x QSFP+ Managed Switch Tested
$140.00
Juniper Networks EX4300-48T 48 Port Gigabit 4 QSFP 40G 2xPSU AFO Network Switch
$89.00
Juniper EX2200-C-12T-2G Fanless 12-port Ethernet Switch with 2 SFP
$75.77
Juniper Networks SRX220 8-Port Gigabit Services Gateway Security Appliance
$45.00