Hi,
I can use my Knoppix live cd for telnetting, ftp'ing to localhost w/o problems using the default
inetd.conf file which contains lines like:
However when I disable tcpd and try to use the barebone telnetd, ftpd, etc. using theCode:ftp stream tcp nowait root /usr/sbin/tcpd /usr/sbin/in.ftpd telnet stream tcp nowait root /usr/sbin/tcpd /usr/sbin/in.telnetd
following configuration I cannot telnet or ftp to myself:
I rerun the inetd and then try to telnet to receive this response:Code:ftp stream tcp nowait root /usr/sbin/in.ftpd telnet stream tcp nowait root /usr/sbin/in.telnetd
As you see, when I'm not using tcpd it just automatically disables telnet, ftp, etc. I've tried itCode:knoppix@ttyp4[knoppix]$ telnet localhost Trying 127.0.0.1... Connected to Knoppix. Escape character is '^]'. Connection closed by foreign host.
hosts.allow, hosts.deny, I've also tried it w/o these files. Nothing changes.
Is it impossible to use inetd without tcpd on Knoppix? If it is possible, how?
Thanks in advance.
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
Cisco UCS LSI MegaRAID 9271CV-8I SAS2308 PCIe SAS Internal RAID Controller
$28.00
Intel PCIe SSD AIC RAID Controller Card G97168-252
$44.55
Oracle 7085209 LSI MegaRAID SAS 9361-8i 1GB Cache 12Gbps SAS/SATA PCIe RAID Card
$28.20
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRaid 9361-8i 12Gbps SAS / SATA Raid Controller PCIe x8 3.0 Tested
$29.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$82.49
Oracle Sun 8-Port 6 Gbps SAS/SATA Raid Controller PCIe w/Cables 7055240 7047503
$13.49
G TECHNOLOGY G RAID 0G04228 2-Bay Thunderbolt 2 RAID Array W/Power Supply
$99.99
4 Bay RAID External Hard Drive Enclosure for 2.5/3.5" SATA HDD/SSD
$79.99