-
Senior Member
registered user
"Starting the X Window System..."
~
I am starting knoppix 5.1.1 with the following cheatcode on a box with the hardware you can see (Ethernet info deleted).
~
The thing is that when I go "init 5", I see how the X Window System starts
~
root!tt1:/# init 5
Executing /etc/init.d/xsession
...
~
but it all stops like this:
~
Probing/Loading AGP modules ...
Starting the X Window System ...
~
Also the most annoying thing is that it does not happen consistently
~
Where in the X Window System or wherever should I look into in order to debug this problem?
~
Thank you
lbrtchx
~
knoppix@Knoppix:~$ dmesg | grep knoppix
Kernel command line: ramdisk_size=100000 init=/etc/init lang=us apm=power-off vga=791 initrd=minirt.gz nomce loglevel=0 quiet BOOT_IMAGE=knoppix BOOT_IMAGE=linux init 2 xmodule=vesa fb1280x1024 depth=16 bootfrom=/dev/hdb5
~
knoppix@Knoppix:~$ free
total used free shared buffers cached
Mem: 2010344 565248 1445096 0 18992 296688
-/+ buffers/cache: 249568 1760776
Swap: 0 0 0
~
knoppix@Knoppix:~$ lspci -v
00:00.0 Host bridge: Silicon Integrated Systems [SiS] Unknown device 0662 (rev 01)
Flags: bus master, medium devsel, latency 32
Memory at f8000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: <access denied>
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS AGP Port (virtual PCI-to-PCI bridge) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fdb00000-fdbfffff
Prefetchable memory behind bridge: d8000000-dfffffff
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] Unknown device 0966 (rev 59)
Flags: bus master, medium devsel, latency 0
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01) (prog-if 80 [Master])
Subsystem: Silicon Integrated Systems [SiS] SiS5513 EIDE Controller (A,B step)
Flags: bus master, medium devsel, latency 128, IRQ 16
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at 4000 [size=16]
Capabilities: <access denied>
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Unknown device c5f0
Flags: bus master, medium devsel, latency 52, IRQ 22
I/O ports at f000 [size=256]
I/O ports at fd00 [size=128]
Capabilities: <access denied>
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Unknown device 3086
Flags: bus master, medium devsel, latency 64, IRQ 18
Memory at fdfff000 (32-bit, non-prefetchable) [size=4K]
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Unknown device 3086
Flags: bus master, medium devsel, latency 64, IRQ 19
Memory at fdffe000 (32-bit, non-prefetchable) [size=4K]
00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller (prog-if 20 [EHCI])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Unknown device 3086
Flags: bus master, medium devsel, latency 64, IRQ 17
Memory at fdffd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:05.0 IDE interface: Silicon Integrated Systems [SiS] Unknown device 1183 (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Silicon Integrated Systems [SiS] Unknown device 1183
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at fb00 [size=8]
I/O ports at fa00 [size=4]
I/O ports at f900 [size=8]
I/O ports at f800 [size=4]
I/O ports at f700 [size=16]
I/O ports at f600 [size=128]
Capabilities: <access denied>
00:06.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fda00000-fdafffff
Prefetchable memory behind bridge: 00000000fde00000-00000000fdefffff
Capabilities: <access denied>
00:07.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fdd00000-fddfffff
Prefetchable memory behind bridge: 00000000fdc00000-00000000fdcfffff
Capabilities: <access denied>
00:1f.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fd900000-fd9fffff
Prefetchable memory behind bridge: 00000000fd800000-00000000fd8fffff
Capabilities: <access denied>
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 661/741/760/761 PCI/AGP VGA Display Adapter (rev 04) (prog-if 00 [VGA])
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Unknown device 3086
Flags: 66MHz, medium devsel, IRQ 10
BIST result: 00
Memory at d8000000 (32-bit, prefetchable) [size=128M]
Memory at fdbe0000 (32-bit, non-prefetchable) [size=128K]
I/O ports at df00 [size=128]
Capabilities: <access denied>
knoppix@Knoppix:~$
-
Senior Member
registered user
Re: "Starting the X Window System..."
Originally Posted by
Albretch
~
I am starting knoppix 5.1.1 with the following cheatcode on a box with the hardware you can see (Ethernet info deleted).
~
The thing is that when I go "init 5", I see how the X Window System starts
~
root!tt1:/# init 5
Executing /etc/init.d/xsession
...
~
but it all stops like this:
~
Probing/Loading AGP modules ...
Starting the X Window System ...
~
Also the most annoying thing is that it does not happen consistently
~
Where in the X Window System or wherever should I look into in order to debug this problem?
~
Thank you
lbrtchx
~$
The place to log for error messages is either /var/log/messages or more specificly /var/log/Xorg.0.log
The only problem of course is that if the systems fails to load, its not forced to write an entry in Xorg.log
One other point of note is that 5.1.1 used kernel 2.4.19 so if your display adapter isnt recognised correctly
then you may get this intermittant problem
Hal
Similar Threads
-
By montalegrejorge in forum Laptops
Replies: 2
Last Post: 03-09-2008, 10:50 PM
-
By onemustfall in forum Hardware & Booting
Replies: 9
Last Post: 04-27-2007, 07:14 PM
-
By cvevans in forum Hardware & Booting
Replies: 0
Last Post: 11-13-2006, 05:45 AM
-
By jlgarcia in forum Hardware & Booting
Replies: 2
Last Post: 02-04-2006, 08:52 PM
-
By cumulus in forum General Support
Replies: 2
Last Post: 10-12-2004, 09:47 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell Memory SNP1CXP8C/16G AB371022 16GB 1Rx8 DDR4 SODIMM 3200MHz RAM
$64.95
Team T-FORCE VULCAN Z 16GB (2 x 8GB) 288-Pin PC RAM DDR4 3200 (PC4 25600) Intel
$35.99
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
HyperX FURY RAM DDR4 16GB 8GB 32GB 4GB 3200 2666 2400 2133 Desktop Memory DIMM
$14.85
A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G
$13.99
A-Tech 16GB 2 x 8GB PC3-12800 Laptop SODIMM DDR3 1600 Memory RAM PC3L 16G DDR3L
$27.98
Original Kingston 8GB 4GB 2GB DDR2 800Mhz PC2-6400 KVR800D2N6/2G Desktop Memory
$13.67
Kingston HyperX FURY DDR3 8GB 16GB 32G 1600 1866 1333 Desktop Memory RAM DIMM
$39.95
Crucial 16GB (2x 8GB) Kit DDR3 1600MHz PC3-12800 UDIMM Desktop 240-Pin CL11 RAM
$22.55
Corsair Vengeance 32GB 16GB 8GB DDR3 1600MHz 1866MHz 2133MHz 2400MHz Memory LOT
$79.99