Moin,
seit ich mein Knoppix 6.0.1 auf "squeeze" umgestellt/geupgraded habe kommt beim Start die Fehlermeldung
Can't access the Hardware Clock via any known method
Ich fand eine Lösung im Netz ... einfach in /etc/moduls noch das Modul "rtc-cmos" eintragen. Leider gibt es dieses
Modul nicht. Kann mir jemand sagen welches Modul ich anstelle dieses installieren muss, bzw. welches Paket?
Es handelt sich um einen Dell Inspiron Laptop und Knoppix läuft von USB-Stick.
Grüße und schon einmal Danke,
beambot
CISCO UCSB-B200-M5 UCS B200 M5 BLADE SERVER - CAN BUILD TO SPEC
$495.00
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
DELL PowerEdge M630 Blade 2x E5-2680v4 2.4GHz =28 Cores 128GB H330 2x10Gb X520
$275.00
Sun Microsystems Blade 100 Workstation UltraSPARC-IIe 500MHz 256MB Server No HDD
$95.00
Dell PowerEdge M620 Blade Server 2 x Xeon e5 2665 8 x 16 GB(128) RAM - No HD
$59.99
Cisco UCSB-B200-M5 V05 Blade Server with 2x GOLD 6146, 3.2GHZ 64GB RAM, NO SSD
$649.00
HP ProLiant BL460c Gen9 Blade Server Intel Xeon E5-2698 v3 - 512GB RAM
$255.61
Dell PowerEdge M620 Blade Server 2x 10C E5-2690v2 64GB Ram 2x 600GB 10k HDD
$125.00
HP ProLiant BL460c Gen9 Blade 2x E5-2690v4 2.6GHz =28 Cores 32GB P246 650FLB
$223.00
HP ProLiant BL460c Gen9 Blade Server 1x Xeon E5-2623 v3 3.00GHz 16GB DDR4 No HDD
$169.99