Moin,
seit ich mein Knoppix 6.0.1 auf "squeeze" umgestellt/geupgraded habe kommt beim Start die Fehlermeldung
Can't access the Hardware Clock via any known method
Ich fand eine Lösung im Netz ... einfach in /etc/moduls noch das Modul "rtc-cmos" eintragen. Leider gibt es dieses
Modul nicht. Kann mir jemand sagen welches Modul ich anstelle dieses installieren muss, bzw. welches Paket?
Es handelt sich um einen Dell Inspiron Laptop und Knoppix läuft von USB-Stick.
Grüße und schon einmal Danke,
beambot
CISCO 5108 Blade Server Chassis N20-C6508
$200.00
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell PowerEdge M640 Blade Server 2x Xeon Gold 5122 3.6GHz, No RAM, READ _
$401.04
Dell PowerEdge VRTX Rack Chassis 25-Bay 14.4TB HDD 2x M640 Blade 512GB RAM 2-Bay
$2335.00
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
HP ProLiant BL460c Server Blade (2 x CPU) 24GB RAM/No Drives
$45.60
Dell PowerEdge M1000E 16x Slots Blade Server W/ 8x Blade Server Blank Filler
$589.00
Dell PowerEdge M620 Blade Server
$39.99
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99