Moin,
seit ich mein Knoppix 6.0.1 auf "squeeze" umgestellt/geupgraded habe kommt beim Start die Fehlermeldung
Can't access the Hardware Clock via any known method
Ich fand eine Lösung im Netz ... einfach in /etc/moduls noch das Modul "rtc-cmos" eintragen. Leider gibt es dieses
Modul nicht. Kann mir jemand sagen welches Modul ich anstelle dieses installieren muss, bzw. welches Paket?
Es handelt sich um einen Dell Inspiron Laptop und Knoppix läuft von USB-Stick.
Grüße und schon einmal Danke,
beambot
Dell PowerEdge R730 2x E5-2699V3 2.3Ghz 36 Core 128GB RAM H730 X520-I350 2x750W
$299.99
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 240GB SSD 2x 10GBE
$259.00
Dell PowerEdge T420 2x Xeon E5-2430 V2 2.50GHZ 32GB DDR3-1600MHZ 2x 550W PSU
$149.95
DELL PowerEdge R730 Server 2x E5-2697v4 2.3GHz =36 Cores 128GB H730 4xRJ45
$461.00
DELL R630 SERVER 8 x 2.5'' 2X E5-2680V4 32GB RAM IDRAC ENT & NDC 2X 495W PSU
$169.95
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
Dell Poweredge R730xd 12x 3.5 + 2x 2.5 / 2x E5-2680 v3 2.5ghz 32gb H730 2x 1100w
$349.99
Dell PowerEdge T620 Server 2x E5-2630 v2 2.60GHz 64GB RAM - NO HDDs
$242.99