-
Knoppix 6.2 Hard Drive install – Setting your desktop cloc
By default my hd install of Knoppix 6.2 always sets the system clock to the wrong time (for NZ) and the time zone setting defaults to <America/NewYork>.
you can change Knoppix to your time-zone with the following command run as root
<dpkg-reconfigure tzdata>
and then choosing from the lists that come up, first your general area, e.g. <Pacific> and then appropriate city e.g. <Auckland> BUT this will be lost and reset to <America/NewYork> each time you re-boot [at least mine was]
Once you're in your correct time-zone you can then set the correct system clock time by running the command:
<date 120310422009> [that's for 10:42 on 3rd December 2009]
but again it will all be lost when you reboot and all needs to be done over again – and you need to have an accurate clock available to reset it from
SO
Is there a long term solution?
For the Time Zone problem - Find your time-zone [in the right format] from /usr/share/zoneinfo/####/#### - in my case <Pacific/Auckland> and then go to your editor [as root] and open /etc/init.d/knoppix-autoconfig and change line 357 from <KTZ="$(getbootparam tz)"> to <KTZ='Pacific/Auckland'> or whatever your own zone is. This will get you into the right time-zone each time you boot but will still not get the correct system time
For the correct time problem - I've installed the small debian package ntpdate - add your closest <####.pool.ntp.org> ntp servers to the appropriate lines of /etc/default/ntpdate – and that's it – if you're automatically connected to the net when you boot up then ntpdate will run at boot and set your system clock to the correct time and if not when you do connect to the net it will run soon after and correct the time you see in the bottom right hand corner of the screen. If all else fails you can run the command [as root]
<ntpdate nz.pool.ntp.org> [changing <nz> to whatever your nearest area pool server is] or I suppose you could write a simple script to run this command at boot time.
Has anyone found a simpler or more elegant solutions to this problem with Knoppix 6.2 as a hard drive install? I never had this problem with Knoppix 6.01 as a hard drive install.
It's a great distro but it's good to have the right time too.
Best wishes, John
PS - 02 Mar 2010 - If you have the dvd version as hard drive install you can go (as root in a terminal) to <time-admin> and change what you need to there - much more easily.
-
Re: Knoppix 6.2 Hard Drive install – Setting your desktop
Originally Posted by
johnmd
By default my hd install of Knoppix 6.2 always sets the system clock to the wrong time (for NZ) and the time zone setting defaults to <America/NewYork>.
you can change Knoppix to your time-zone with the following command run as root
<dpkg-reconfigure tzdata>
and then choosing from the lists that come up, first your general area, e.g. <Pacific> and then appropriate city e.g. <Auckland> BUT this will be lost and reset to <America/NewYork> each time you re-boot [at least mine was]
Once you're in your correct time-zone you can then set the correct system clock time by running the command:
<date 120310422009> [that's for 10:42 on 3rd December 2009]
but again it will all be lost when you reboot and all needs to be done over again – and you need to have an accurate clock available to reset it from
SO
Is there a long term solution?
For the Time Zone problem - Find your time-zone [in the right format] from /usr/share/zoneinfo/####/#### - in my case <Pacific/Auckland> and then go to your editor [as root] and open /etc/init.d/knoppix-autoconfig and change line 357 from <KTZ="$(getbootparam tz)"> to <KTZ='Pacific/Auckland'> or whatever your own zone is. This will get you into the right time-zone each time you boot but will still not get the correct system time
For the correct time problem - I've installed the small debian package ntpdate - add your closest <####.pool.ntp.org> ntp servers to the appropriate lines of /etc/default/ntpdate – and that's it – if you're automatically connected to the net when you boot up then ntpdate will run at boot and set your system clock to the correct time and if not when you do connect to the net it will run soon after and correct the time you see in the bottom right hand corner of the screen. If all else fails you can run the command [as root]
<ntpdate nz.pool.ntp.org> [changing <nz> to whatever your nearest area pool server is] or I suppose you could write a simple script to run this command at boot time.
Has anyone found a simpler or more elegant solutions to this problem with Knoppix 6.2 as a hard drive install? I never had this problem with Knoppix 6.01 as a hard drive install.
It's a great distro but it's good to have the right time too.
Best wishes, John
THANK YOU SOOOOOOOOOOOOO VERY MUCH!!!
-
Originally Posted by
johnmd
PS - 02 Mar 2010 - If you have the dvd version as hard drive install you can go (as root in a terminal) to <time-admin> and change what you need to there - much more easily.
Thanks so much, that was the best solution of all...
-
Senior Member
registered user
I like to keep my system clock and my hardware clock set to local time.
After fiddling with ntpdate and trying to understand all of the intricate and confusing linux time settings, I took total control of the situation with the following script that I run at each bootup and via a cron job every day at 6:30 am.
#!/bin/bash
#To get a list of server names and ip addresses, go to
# http://www.nist.gov/pml/div688/grp40/its.cfm
#Get the time from an internet time server
hhmmss=$(rdate -p -4 -u time-a.nist.gov | tr -s " " | cut -d' ' -f4)
#hhmmss is now a time field of the form hh:mm:ss in utc format
utchour=$(echo $hhmmss | cut -d':' -f1)
minute=$(echo $hhmmss | cut -d':' -f2)
second=$(echo $hhmmss | cut -d':' -f3)
#for my timezone, my offset from utc is 5 hours
OFFSET=5
#To convert the hours to local time
hour=$(( $(($utchour+24-$OFFSET)) % 24 ))
thetime="$hour:$minute:$second"
echo $thetime
#set the system time to thetime
sudo date -s $thetime
#set the hardware clock to the system time
sudo hwclock --systohc
date > /home/knoppix/date.log
Similar Threads
-
By Kirk-out in forum Hardware & Booting
Replies: 2
Last Post: 08-06-2008, 07:25 PM
-
By Crimpshrine in forum MS Windows & New to Linux
Replies: 13
Last Post: 08-23-2006, 12:28 PM
-
By slvrldy17 in forum MS Windows & New to Linux
Replies: 2
Last Post: 02-23-2006, 04:06 AM
-
By maxmartin in forum Customising & Remastering
Replies: 4
Last Post: 02-19-2006, 06:09 PM
-
By Lion in forum Hdd Install / Debian / Apt
Replies: 2
Last Post: 05-13-2005, 10:45 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Supermicro 4U 36 Bay Storage Server 2.2Ghz 16-C 128GB 1x1280W Rails TrueNAS ZFS
$725.06
H261-Z61 2U 24SFF AMD Server 8x EPYC 7551 256-Cores 256GB RAM 8x25G NIC 2x2200W
$2612.18
HP ProLiant DL360 G9 Server | 2 x E5-2660V3 2.6Ghz | 64GB | 2 x 900GB SAS HDD
$339.00
CSE-118 Supermicro 1U GPU Server 2.6Ghz 28-C 128GB 2x Nvidia K40 GPU 2x1600W PSU
$580.03
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$274.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD
$196.95
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
HP ProLiant DL380 Gen9 16SFF 2x E5-2680v4 2.4GHz =28 Cores 64GB P840 4xRJ45
$353.00
Dell Poweredge R730xd 2.5in 2x E5-2690 v3 2.6ghz 24-Cores 64gb H730 2x 750w
$189.99