The nice thing is it sets up my Realtek 8111C Ethernet Controller
However it selects the wrong graphics card
The Mini-ITX board has an Intel GMA 950 graphics chip but sees:The even odder thing is that the Jetway JNF94-270-LF doesn't appear to have any VIA chip on the board.Code:root@Microknoppix:/# lspci -v 00:00.0 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge Subsystem: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge Flags: bus master, 66MHz, medium devsel, latency 8 Memory at e8000000 (32-bit, prefetchable) [size=128M] Capabilities: [80] AGP version 3.5 Capabilities: [50] Power Management version 2 Kernel driver in use: agpgart-via 00:00.1 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge Flags: bus master, medium devsel, latency 0 00:00.2 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge Flags: bus master, medium devsel, latency 0 00:00.3 Host bridge: VIA Technologies, Inc. PT890 Host Bridge Flags: bus master, medium devsel, latency 0 00:00.4 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge Flags: bus master, medium devsel, latency 0 00:00.7 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge Flags: bus master, medium devsel, latency 0 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge (prog-if 00 [Normal decode]) Flags: bus master, 66MHz, medium devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fb000000-fcffffff Prefetchable memory behind bridge: f4000000-f7ffffff Capabilities: [70] Power Management version 2 00:08.0 Ethernet controller: Accton Technology Corporation EN-1216 Ethernet Adapter (rev 11) Subsystem: U.S. Robotics Device 00ed Flags: bus master, medium devsel, latency 32, IRQ 17 I/O ports at f600 [size=256] Memory at fdfff000 (32-bit, non-prefetchable) [size=1K] [virtual] Expansion ROM at 1c000000 [disabled] [size=128K] Capabilities: [c0] Power Management version 2 Kernel driver in use: tulip Kernel modules: tulip 00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10) Subsystem: Jetway Information Co., Ltd. Device 10ec Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18 I/O ports at f400 [size=256] Memory at fdffe000 (32-bit, non-prefetchable) [size=256] [virtual] Expansion ROM at 1c020000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Kernel driver in use: r8169 Kernel modules: r8169 00:0f.0 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP]) Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE Flags: bus master, medium devsel, latency 32, IRQ 20 [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] I/O ports at ff00 [size=16] Capabilities: [c0] Power Management version 2 Kernel driver in use: pata_via
The chipset is Intel 945GSE + ICH7M
+ ATOM CPU
+ ALC662 Audio
Even though the board works OK (I think) apart from the graphics should I be worried that most hardware detection seems incorrect and I'm piling up problems for the future?
Sorry. Should have mentioned the plug in NIC - it's there because every other distro I've tried won't recognise the Realtek.
[edit] Anyone any suggestions? I'm stuck with max. 800x600. And why doesn't lspci -v show graphics adapter? [edit]
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00
HPE ProLiant MicroServer Gen8 Intel Xeon E3-1265L 16GB ECC PCIe x16 4x1TB HDD
$249.99
HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVES
$199.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ*
$94.99
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon
$846.19
Supermicro 5018A-FTN4 Rack Server - Black
$125.00
Microsel Server Tower Supermicro X10SAE E3-1275 V3 @3.5GHz 16GB 509849-001
$149.99
SUPERMICRO CSE-512 AMD Opteron Processor 6128, 32GB DDR3 RAM NO HDD
$90.00
1U 20" Short Depth Server Firewall PFSense X11SSH-F Xeon 3.5Ghz 32GB RAM NVME
$247.00