The nice thing is it sets up my Realtek 8111C Ethernet Controller
However it selects the wrong graphics card
The Mini-ITX board has an Intel GMA 950 graphics chip but sees:The even odder thing is that the Jetway JNF94-270-LF doesn't appear to have any VIA chip on the board.Code:root@Microknoppix:/# lspci -v 00:00.0 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge Subsystem: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge Flags: bus master, 66MHz, medium devsel, latency 8 Memory at e8000000 (32-bit, prefetchable) [size=128M] Capabilities: [80] AGP version 3.5 Capabilities: [50] Power Management version 2 Kernel driver in use: agpgart-via 00:00.1 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge Flags: bus master, medium devsel, latency 0 00:00.2 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge Flags: bus master, medium devsel, latency 0 00:00.3 Host bridge: VIA Technologies, Inc. PT890 Host Bridge Flags: bus master, medium devsel, latency 0 00:00.4 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge Flags: bus master, medium devsel, latency 0 00:00.7 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge Flags: bus master, medium devsel, latency 0 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge (prog-if 00 [Normal decode]) Flags: bus master, 66MHz, medium devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fb000000-fcffffff Prefetchable memory behind bridge: f4000000-f7ffffff Capabilities: [70] Power Management version 2 00:08.0 Ethernet controller: Accton Technology Corporation EN-1216 Ethernet Adapter (rev 11) Subsystem: U.S. Robotics Device 00ed Flags: bus master, medium devsel, latency 32, IRQ 17 I/O ports at f600 [size=256] Memory at fdfff000 (32-bit, non-prefetchable) [size=1K] [virtual] Expansion ROM at 1c000000 [disabled] [size=128K] Capabilities: [c0] Power Management version 2 Kernel driver in use: tulip Kernel modules: tulip 00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10) Subsystem: Jetway Information Co., Ltd. Device 10ec Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18 I/O ports at f400 [size=256] Memory at fdffe000 (32-bit, non-prefetchable) [size=256] [virtual] Expansion ROM at 1c020000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Kernel driver in use: r8169 Kernel modules: r8169 00:0f.0 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP]) Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE Flags: bus master, medium devsel, latency 32, IRQ 20 [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] I/O ports at ff00 [size=16] Capabilities: [c0] Power Management version 2 Kernel driver in use: pata_via
The chipset is Intel 945GSE + ICH7M
+ ATOM CPU
+ ALC662 Audio
Even though the board works OK (I think) apart from the graphics should I be worried that most hardware detection seems incorrect and I'm piling up problems for the future?
Sorry. Should have mentioned the plug in NIC - it's there because every other distro I've tried won't recognise the Realtek.
[edit] Anyone any suggestions? I'm stuck with max. 800x600. And why doesn't lspci -v show graphics adapter? [edit]
Cisco (SG100D-05-UK) 5-Ports External Ethernet Switch
$40.00
Cisco SG110 24 Port Gigabit Ethernet Switch w/ 2 x SFP SG110-24
$117.00
HP Procurve 2824 24 Gigabit Ports 10/100/1000 External Managed Switch J4903A
$74.99
Cisco SG95-16 16-Port Gigabit Switch SG95-16-SG
$47.00
Juniper Networks EX3300-48P 48-Port PoE+ 4x SFP+ Network Switch w/ Power Cord
$43.95
New Linksys SE3005 5-port Gigabit Ethernet Switch
$18.99
Linksys SE3008 8 Ports Rack Mountable Gigabit Ethernet Switch
$21.99
New 10/100 Mbps 8 Ports Fast Ethernet LAN Desktop RJ45 Network Switch Hub
$11.49
Netgear Prosafe Plus JGS524PE 24 Port Gigabit Switch 12 Port PoE JGS524PE-100NAS
$129.98
Fortinet FortiSwitch FS-124D-POE 24 Port Gigabit Ethernet Switch UNREGISTERED
$99.97