Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: Can't Boot with CD

  1. #11
    Junior Member
    Join Date
    Jan 2010
    Posts
    7
    Ok so I finally got that figured out and disconnected the power and the ribbon to the hard drive.

    I now get a message on the screen that says "Reboot and Select proper Boot device or Insert Boot Media in selected Boot device." No matter what I try I can't get past this message. I figured out how to use f2 to get into the Bios and set my dvd drive as the boot drive which is where the CD with Knoppix is, but still no luck.

    I am curious, even if I could get the thing to boot, how could I recover my data if the hard drive is disconnected?

    Any more suggestions will be deeply appreciated.

    Thanks

  2. #12
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441
    Quote Originally Posted by MaxHeadRoom
    I am curious, even if I could get the thing to boot, how could I recover my data if the hard drive is disconnected?
    You couldn't, but the disconnection of the drive was more of a test to see if the drive was keeping you from booting than an effort to recover. It may well be, from what we are seeing here, that the drive has a hardware failure and you are not likely to recover anything from it. However, it is pretty suspicious that you still can't get a CD or DVD to boot, so I would hold off on calling that hard drive "dead" just yet.

    I'm at a loss to tell you what to try next. Perhaps one of the others will have an idea.
    ---
    Verifying of md5 checksum and burning a CD at slow speed are important.

  3. #13
    Senior Member registered user
    Join Date
    Sep 2006
    Posts
    802

    Mount the drive in an external cabinet

    Quote Originally Posted by Harry Kuhman
    Quote Originally Posted by MaxHeadRoom
    I am curious, even if I could get the thing to boot, how could I recover my data if the hard drive is disconnected?
    You couldn't, but the disconnection of the drive was more of a test to see if the drive was keeping you from booting than an effort to recover. It may well be, from what we are seeing here, that the drive has a hardware failure and you are not likely to recover anything from it. However, it is pretty suspicious that you still can't get a CD or DVD to boot, so I would hold off on calling that hard drive "dead" just yet.

    I'm at a loss to tell you what to try next. Perhaps one of the others will have an idea.
    To recover data from a drive in a problematic PC, the safest is to take it out and mount it in an external USB cabinet. You get them for all actual drive types/sizes.
    From the problem description, it would seem most likely that the BIOS is malfunctioning. Seldom worthwhile fixing on older PCs, in my opinion.

  4. #14
    Senior Member registered user
    Join Date
    Oct 2003
    Location
    N42.41 W73 and change
    Posts
    401
    You could try resetting the bios by removing the coin size battery on the motherboard for a few moments. Unplug the computer first.

    Since neither the CD or the hard drive will boot, I wouldn't necessarily give up on either of them. The fault may well be in the motherboard, so recovery of data from the drive using an external enclosure might be possible.

    HTH

  5. #15
    Junior Member
    Join Date
    Jan 2010
    Posts
    7
    Thanks everybody. I have lots to try now. I'll let you know how it all plays out.

    Thanks again so very much for all your help, ideas and suggestions.

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Juniper Networks EX2300-48P 48 Port Gigabit PoE 4 SFP 1/10G Network Switch picture

Juniper Networks EX2300-48P 48 Port Gigabit PoE 4 SFP 1/10G Network Switch

$185.00



Juniper Networks EX2200-C-12P-2G Gigabit Ethernet Managed Switch picture

Juniper Networks EX2200-C-12P-2G Gigabit Ethernet Managed Switch

$79.99



Juniper Networks EX2200-C Ethernet Managed Switch w/ Rack Mounts picture

Juniper Networks EX2200-C Ethernet Managed Switch w/ Rack Mounts

$74.99



Juniper EX3300-48P 48-Port 10/100/1000BASE-T (48 PoE+ ports) with 4 SFP+ picture

Juniper EX3300-48P 48-Port 10/100/1000BASE-T (48 PoE+ ports) with 4 SFP+

$74.00



Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch picture

Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch

$59.95



Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch picture

Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch

$30.00



Juniper Networks EX3300 EX3300-48P PoE+ 48-Port 4x SFP Gigabyte Ethernet Switch picture

Juniper Networks EX3300 EX3300-48P PoE+ 48-Port 4x SFP Gigabyte Ethernet Switch

$59.99



Juniper EX3400-48P 48 Port Switch PoE+ 4x SFP+ 2x QSFP 1xAC *Tested/Warranty* picture

Juniper EX3400-48P 48 Port Switch PoE+ 4x SFP+ 2x QSFP 1xAC *Tested/Warranty*

$139.95



Juniper Networks EX2300-C-12T Compact 12-Port EX2300-C Series Ethernet Switch picture

Juniper Networks EX2300-C-12T Compact 12-Port EX2300-C Series Ethernet Switch

$300.00



Juniper Networks SRX220 8-Port Gigabit Services Gateway Security Appliance picture

Juniper Networks SRX220 8-Port Gigabit Services Gateway Security Appliance

$45.00