nevermind, recopied at a slower burn rate as per suggestions elsewhere on the forum. allles gut.
So I've decided to take the initial plunge into Linux. Downloaded Knoppix Live CD and after some trial and error finaly got a bootable CD burned. Thing started nicely then I got messages
su: Module is unknown
INIT: ID "1" respawning too fast; disabled for 5 minutes
both lines repeat several times with the INIT: ID going through "1" - "10" although not nescessarily in numerical sequence.
I have no clue what's happening other than that the install is hanging up. Is this bad media or a hardware issue? Any ideas appreciated.
nevermind, recopied at a slower burn rate as per suggestions elsewhere on the forum. allles gut.
Kslip, great that you found answer yourself. searching this forum WILL answer most questions.
keep asking as other questions pop up and sorry I missed this yesterday
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$179.99
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$55.45
OWC Guardian Maximus Raid Enclosure SATA Hard Drive FireWire
$36.99
Dell 7H4CN PERC H730P Raid Controller Mini Mono12GBPS 2GB NV Cache
$44.99
Inspur LSI YZCA-00424-101 Raid Card 12Gbps HBA Controller Low Profile 9300-8i IT
$15.98
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 04Y5H1 High Profile
$13.99
Dell EMC 092GD6 Broadcom 9305-16i LSI Quad Port 4 Port SAS RAID Controller
$99.99
Dell KMCCD PERC H730 MINI MONO 1GB RAID CONTROLLER W/Battery
$26.99
Yottamaster 2 Bay USB 3.1 RAID Hard Drive Enclosure For 2.5" SATA HDD SSD UASP
$59.99