For clarification I have 2 40Gb IDE hard drives in my Fedora box. When I boot Knoppix it only sees /media/sda1 my old boot partition.
Hi,
I am using Knoppix v6.2 to recover some file off my Fedora 12 box. The install of the Fedora 12 upgrade went bad.
I have a copy of Knoppix Hacks and on page 226 (Hack #75) Kyle describes mounting a Raid drive. When I use the mdadm command as described I get a error message “No such file or directory”. See results below.
#####
knoppix@Microknoppix:~$ fdisk /dev/sda
The number of cylinders for this disk is set to 4865.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Command (m for help): p
Disk /dev/sda: 40.0 GB, 40020664320 bytes
255 heads, 63 sectors/track, 4865 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000f053e
Device Boot Start End Blocks Id System
/dev/sda1 * 1 25 200781 83 Linux
/dev/sda2 26 4865 38877300 8e Linux LVM
Command (m for help): q
knoppix@Microknoppix:~$ sudo modprobe md
knoppix@Microknoppix:~$ sudo mdadm --assemble --auto=yes /dev/md0 /dev/hda1 /dev/hdb1
mdadm: cannot open device /dev/hda1: No such file or directory
mdadm: /dev/hda1 has no superblock - assembly aborted
knoppix@Microknoppix:~$ sudo mdadm --assemble --auto=yes /dev/md0 /dev/sda1 /dev/sda2
mdadm: no recogniseable superblock on /dev/sda1
mdadm: /dev/sda1 has no superblock - assembly aborted
knoppix@Microknoppix:~$
########
Thanks for your time,
Val
For clarification I have 2 40Gb IDE hard drives in my Fedora box. When I boot Knoppix it only sees /media/sda1 my old boot partition.
Cisco Systems NCS2K-20-SMRFS-L optical multiplexor CISCO EXCESS
$3599.00
Cisco RV320 Dual WAN VPN 4 Port Gigabit Router w/ Web Filtering RV320-WB-K9-NA
$374.00
Cisco SG110 24 Port Gigabit Ethernet Switch w/ 2 x SFP SG110-24
$117.00
Cisco ASA5525-FTD-K9 Security Appliance with FirePower Services
$1000.00
Cisco WS-C3850-48P-L 48-Port Gigabit 3850 PoE Switch w/ 715W+ C3850-NM-4-1G Mod
$83.00
Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850
$38.99
Cisco CBS350-24FP-4G 28 Port PoE Managed Ethernet Switch
$319.99
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
Cisco C9200 48-Port Gigabit Network Switch With Ears P/N: C9200-48T-E Dual Power
$799.97
New Cisco C9200-NM-4X Catalyst 9200 Series Network Module 4 X 10GE *MINT*
$429.97