Results 1 to 4 of 4

Thread: How to upgrade VirtualBox OSE to Puel (or share files with Windows guests)

  1. #1
    Junior Member
    Join Date
    Apr 2010
    Posts
    3

    How to upgrade VirtualBox OSE to Puel (or share files with Windows guests)

    Hi,

    I have been getting used to using this software and it is great! I have V6.2 Knoppix and am running it on a small laptop with an Atom processor without problems. So what is wrong? I am using Vbox and need file sharing with the Linux host which is not possible using OSE. I set up a bridged network and a Windows file share that is accessible from both Windows and the host, but I cannot write to it from the host -- Only from Windows. I got to a point where it seemed everything (except file sharing) was working and tried to install the PUEL version on top of the OSE version because I did not want to risk uninstalling it as it seems that perhaps it is being used by Knoppix (and I did not want to break Knoppix). I instead broke VBox and had to reinstall Knoppix to my USB (which is another story!) and start from scratch in any case. I have been working for two days now trying to get this share to work both ways and as an alternative to reinstalling VBox, guidance on that could also be helpful if upgrading is not an option!

    Thanks in advance for any advice, Robert!

  2. #2
    Moderator Moderator
    Join Date
    Jan 2010
    Location
    Asheville, NC, USA
    Posts
    528
    I use Knoppix on a Flash with a "shared drive" approach - Knoppix looks like a couple of large files taking up room (no Vbox needed) but I'm only using Windows as an alternative that my wife knows better than Linux and sharing files for a later boot to Knoppix. Are you running Windows within the Virtual environment, I assume? If you'd like to share your virtual machine, I could try running it and see what I can do.

    Cheers!
    Krishna

  3. #3
    Junior Member
    Join Date
    Apr 2010
    Posts
    3
    H Krishna,

    Thanks for replying! I am also using the thumb drive approach to run Knoppix which leaves the system"untouched" with Windows 7 installed and usable (should it be needed). I need the Windows share because all my customers run Windows applications and I need to try things in a windows environment so Wine won't work. Last night, I tried something because I know this is "simply" a permissions problem: I switched to the terminal emulator and tried to create a file in my share (cat /dev/null >> testfile) as myself and then again as root. Only the attempts as root worked, which is what I suspected. The problem I have is that even after changing the group and user ID as well as permissions for the folder, as soon as I mount the share into the folder, the owner and group change to root! If I can figure out how to either properly change owner and group for the share, or change my user ID (which I will try later but I am not sure if changing it in etc/password will work). Let me know if you have any ideas

    As for sharing the machine, that would not be a problem, if needed. Let me know what you need, in case we do go that way.

    Regards, Robert

  4. #4
    Junior Member
    Join Date
    Apr 2010
    Posts
    3
    Hi,

    I was able to resolve the second issue of permissions so I now have R/W access to my share from both Knoppix and Windows. I was trying to figure out how to get my CDRW to allow writing and discovered an option to "Open Current Folder as Root" under the "Tool" menu in PCMan and bingo, write access! The CDRW is still not working but that is another problem for another post (if I can't find the answers on my own by looking around).

    In the process of trying to get this working, I ran into new problems relating to the original post -- How to upgrade to PUEL so I can have access to USB from my VM and I also believe it would be better to use the Vbox share than the network share I am using now. The dpcumentation for VBox says to simply install upgrades over the existing one but when I did that, I broke things. Any advice would be helpful!

    Thanks, Robert

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


LaCie 5BIG NETWORK 2 5-bay RAID HDD Bay [ SEE DESCRIPTION ]  picture

LaCie 5BIG NETWORK 2 5-bay RAID HDD Bay [ SEE DESCRIPTION ]

$119.99



3.5

3.5" Dual HHD RAID Drive Enclosure - Capacity 36tb with "0" RAID- 2.5" w/Adapter

$37.15



ORICO 5 Bay Raid Enclosure USB3.0 SATA External Hard Drive Enclosure Up to 80TB picture

ORICO 5 Bay Raid Enclosure USB3.0 SATA External Hard Drive Enclosure Up to 80TB

$115.59



ORICO 5 Bay Raid USB3.0 to SATA External Hard Drive Enclosure for 3.5'' HDD LOT picture

ORICO 5 Bay Raid USB3.0 to SATA External Hard Drive Enclosure for 3.5'' HDD LOT

$134.39



Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile picture

Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile

$15.98



G-Technology G-RAID with Thunderbolt 2 6TB picture

G-Technology G-RAID with Thunderbolt 2 6TB

$150.00



WD TB My Book Duo Desktop RAID External Hard Drive 0TB NO DRIVES picture

WD TB My Book Duo Desktop RAID External Hard Drive 0TB NO DRIVES

$42.00



ASUS Hyper M.2 x16 Gen 4 RAID Card- Used Working picture

ASUS Hyper M.2 x16 Gen 4 RAID Card- Used Working

$32.95



OWC Guardian Maximus Raid Enclosure SATA Hard Drive FireWire picture

OWC Guardian Maximus Raid Enclosure SATA Hard Drive FireWire

$36.99



UGREEN 2 Bay USB-C to SATA HDD SSD RAID Enclosure picture

UGREEN 2 Bay USB-C to SATA HDD SSD RAID Enclosure

$55.00