One of the things I miss about the older versions of Knoppix is the verbose mode of booting where I see the hardware as Knoppix is discovering it. Is there a way I can still display this information at boot time? The information displayed is very minimal compared to the older versions.
I used to use Knoppix heavily for diagnostic issues, but it's not as useful for that without the verbose boot screen...
Hello,
And how could you put this in menu.lst
Or can't?
Thank you.
Alix.
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
881507-001 HPE 2.4TB SAS 12G 10K SC 512E DS G8-G10 Hard Drive 881457-B21 F/S
$274.95
Western Digital WD4000FYYZ RE 4TB 7200 RPM 64MB Cache SATA 6Gb/s 3.5" Hard Drive
$24.15
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$79.99
HGST Ultrastar HE10 10TB SATA 6.0Gb/s 7200 3.5" Datacenter HDD - HUH721010ALE601
$79.99
Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$93.99
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$110.00
HGST HDD HUH721010AL5200 10TB 3.5" SAS 12Gb/s Server Hard Disk Drive *READ
$50.89
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99
Western Digital 4TB Internal 7.2KRPM 3.5" (WD4000FYYZ) SATA Hard Drive ZERO HOUR
$69.99