Results 1 to 4 of 4

Thread: Using fdisk on a large device

  1. #1
    Member registered user
    Join Date
    Dec 2006
    Posts
    49

    Using fdisk on a large device

    Hello,
    Yesterday I tried to format a 2TB drive using fdisk. There are 243201 cylinders and I wanted to set
    /dev/sdd1 cyls 1 - 243000 type 83 Linux
    /dev/sdd2 cyls 243001 - 243201 type 82 swap
    and went through the usual fdisk n (new) p (primary) 1 (partition no) 1 (start) 243000 (finish) n (new) p (primary) hoping to set up a 2nd partition starting at 243001 but got the message "no available sectors".
    I've used fdisk many times (on smaller devices up to 640G) and never got this before. It's as though fdisk is defeated by the large numbers?
    I guess I could try setting up the swap partition on /dev/sdd1 using cylinders 1 to 200 and then use 201 to 243201 for /dev/sdd2 but it would be quaint that fdisk allows one architecture but not another, almost equivalent.
    Anybody seen this before? Should I have anticipated it?
    Thank you.
    Fergus

  2. #2
    Moderator Moderator
    Join Date
    Jan 2010
    Location
    Asheville, NC, USA
    Posts
    528
    Quote Originally Posted by fergus View Post
    Hello,
    Yesterday I tried to format a 2TB drive using fdisk. There are 243201 cylinders and I wanted to set
    /dev/sdd1 cyls 1 - 243000 type 83 Linux
    /dev/sdd2 cyls 243001 - 243201 type 82 swap
    and went through the usual fdisk n (new) p (primary) 1 (partition no) 1 (start) 243000 (finish) n (new) p (primary) hoping to set up a 2nd partition starting at 243001 but got the message "no available sectors".
    I've used fdisk many times (on smaller devices up to 640G) and never got this before. It's as though fdisk is defeated by the large numbers?
    I guess I could try setting up the swap partition on /dev/sdd1 using cylinders 1 to 200 and then use 201 to 243201 for /dev/sdd2 but it would be quaint that fdisk allows one architecture but not another, almost equivalent.
    Anybody seen this before? Should I have anticipated it?
    Thank you.
    Fergus
    Why not try it as you laid it out? No downside I can see. Personally, I'd probably be in a hurry to USE my 2TB drive and just run the GParted program on the Preferences menu...

    Cheers, and let us know what you find!
    Krishna

  3. #3
    Member registered user
    Join Date
    Dec 2006
    Posts
    49
    QTParted did not work: I got an error message objecting to my apparent intention to define a partition with "-1 sectors". Curiouser and curiouser.
    In the end I used cfdisk NOT fdisk to set partitions of the required size; it all worked immediately, easily and without generating any errors (or error messages).
    Fergus

  4. #4
    Senior Member registered user
    Join Date
    Jun 2005
    Posts
    348
    Hi Fergus,

    You didn't say what drive you are attempting to use. If it is one of the "New" Western Digital Advanced Format drives, you may very well need to do some research at the WDC site. Windows XP and some versions of Linux would need special handling. Here's a link to a thread in their forum. http://community.wdc.com/t5/Desktop/...EARS/td-p/6395 If it applies to your drive, it may solve the issue. The one in the thread is a 1.5 TB drive, but the same issues pretty much apply to the 2TB drives as well. There is an issue that the Drive does not report it's correct sector size, etc, to the operating system. It's Western Digital's choice, since it appears that a firmware update could fix it, IF they decided to provide one.
    Last edited by ckamin; 06-06-2010 at 03:01 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Cisco SG95-16 16-Port Gigabit Switch SG95-16-KR picture

Cisco SG95-16 16-Port Gigabit Switch SG95-16-KR

$47.00



Cisco WS-C3750-48PS-S 48-Port Managed Gigabit Switch picture

Cisco WS-C3750-48PS-S 48-Port Managed Gigabit Switch

$45.00



HP ProCurve 4108gl J4865A Modular Network Switch picture

HP ProCurve 4108gl J4865A Modular Network Switch

$30.00



Cisco Catalyst 3850 48 PoE+ 48-Port Gigabit Managed Switch WS-C3850-48F-E picture

Cisco Catalyst 3850 48 PoE+ 48-Port Gigabit Managed Switch WS-C3850-48F-E

$219.99



New Linksys SE3005 5-port Gigabit Ethernet Switch picture

New Linksys SE3005 5-port Gigabit Ethernet Switch

$15.99



Linksys SE3008 8 Ports Rack Mountable Gigabit Ethernet Switch picture

Linksys SE3008 8 Ports Rack Mountable Gigabit Ethernet Switch

$18.99



NETGEAR 5-Port Gigabit Ethernet Unmanaged Switch (GS305) - NEW IN BOX picture

NETGEAR 5-Port Gigabit Ethernet Unmanaged Switch (GS305) - NEW IN BOX

$18.99



Cisco WS-C3750X-48T-S 48 Port 3750X Gigabit Switch - Same Day Shipping picture

Cisco WS-C3750X-48T-S 48 Port 3750X Gigabit Switch - Same Day Shipping

$49.99



*NETGEAR PROSAFE (JGS524V2) 24-Port Gigabit Ethernet Switch *NO AC* picture

*NETGEAR PROSAFE (JGS524V2) 24-Port Gigabit Ethernet Switch *NO AC*

$29.99



Fortinet FortiSwitch FS-124D-POE 24 Port Gigabit Ethernet Switch UNREGISTERED picture

Fortinet FortiSwitch FS-124D-POE 24 Port Gigabit Ethernet Switch UNREGISTERED

$89.97