-
Using fdisk on a large device
Hello,
Yesterday I tried to format a 2TB drive using fdisk. There are 243201 cylinders and I wanted to set
/dev/sdd1 cyls 1 - 243000 type 83 Linux
/dev/sdd2 cyls 243001 - 243201 type 82 swap
and went through the usual fdisk n (new) p (primary) 1 (partition no) 1 (start) 243000 (finish) n (new) p (primary) hoping to set up a 2nd partition starting at 243001 but got the message "no available sectors".
I've used fdisk many times (on smaller devices up to 640G) and never got this before. It's as though fdisk is defeated by the large numbers?
I guess I could try setting up the swap partition on /dev/sdd1 using cylinders 1 to 200 and then use 201 to 243201 for /dev/sdd2 but it would be quaint that fdisk allows one architecture but not another, almost equivalent.
Anybody seen this before? Should I have anticipated it?
Thank you.
Fergus
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
HGST Ultrastar HE10 HUH721010ALE600 10TB SATA 6Gb/s 7200RPM 3.5" Enterprise HDD
$74.99
WD4000FYYZ Western Digital 4TB SATA 3.5 Hard Drive
$149.99
Western Digital WD60PURZ 6TB Hard Drive SATA6 Gb/s 64MB Cache 3.5 Inch
$109.99
WF12F DELL 1TB 7.2K 6GBPS SATA 2.5'' HDD HARD DRIVE ST91000640NS 0WF12F
$25.00
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$82.99
Seagate Exos 7E10 ST2000NM000B 2TB 7200RPM SATA 6.0Gb/s 3.5" Internal Hard Drive
$29.99
2 PACK Seagate ST1000LM035 Mobile HDD 1TB 2.5" SATA III Laptop Hard Drive
$27.25
Western Digital WD5000LPLX 500GB 2.5" SATA 32MB 6Gb/s 7200RPM Laptop Hard Drive
$7.99
WD 16TB Elements Desktop, Certified Refurbished Hard Drive - RWDBWLG0160HBK-NESN
$174.99
Western Digital WD4000FYYZ RE 4TB 7200 RPM 64MB Cache SATA 6Gb/s 3.5" Hard Drive
$28.45