-
Toshiba Satellite 1135-s155 locksup
Hello,
The Knoppix 6.2 version boots and works for a few minutes then locks up. Maybe able to access the internet using a browser however the cursor stops and the system stalls or locks up.
Any Suggestions?
Sincerely,
Mark Spalenka
-
Originally Posted by
markspalenka
Hello,
The Knoppix 6.2 version boots and works for a few minutes then locks up. Maybe able to access the internet using a browser however the cursor stops and the system stalls or locks up.
Any Suggestions?
Sincerely,
Mark Spalenka
Well, if it's not a hardware problem (use F2/F3 to get help with hardware issues), then I think you have a marginal disk. Good news - it's not so hard to fix. Try the media self-test, i.e. or at the boot prompt to check whether you have a good burn on the disk. There are a LARGE number of bad/marginal burns and/or downloads. If it isn't okay, check the md5-sum of your ISO file to make sure it's right, then re-burn at a slower speed, or use another media type if you have one, i.e. CDRW.
Hope that helps!
Krishna
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
CISCO UCSB-B200-M5 UCS B200 M5 BLADE SERVER - CAN BUILD TO SPEC
$495.00
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
HP ProLiant BL460c Gen9 Blade 2x E5-2697v4 2.3GHz =36 Cores 64GB P246 650FLB
$279.00
HP ProLiant BL460c Gen9 Blade 2x E5-2690v4 2.6GHz =28 Cores 32GB P246 650FLB
$223.00
Dell PowerEdge M620 Blade Server 2 x Xeon e5 2665 8 x 16 GB(128) RAM - No HD
$49.99
HP ProLiant BL460c Gen9 Blade Server Intel Xeon E5-2698 v3 - 512GB RAM
$255.42
Dell PowerEdge M520 Blade Server Xeon E5-2403 NO HDD NO RAM
$40.00
DELL POWEREDGE FC640 Blade Server FX2 CTO Barebones iDrac Enterprise Warranty
$199.00
DELL PowerEdge M630 Blade 2x E5-2680v4 2.4GHz =28 Cores 128GB H330 2x10Gb X520
$275.00
HP BL460c G10 Blade 2x Gold 6140 2.3GHz =36 Cores 128GB P204i-B QMH2672 2x 20GB
$642.00