-
Junior Member
registered user
-
Originally Posted by
PattiMichell
I did a full install of 6.2.1 from DVD to an unused 8GB SD drive using the "install to flash drive" utility from a live boot. All seems well, but I keep running afoul of the need for user "knoppix" to have a password. I was able to temporarily fix that by making user "knoppix" part of the "root" group - but nothing (not even ice weasel settings) get saved between boots. Shouldn't that all be saved in /home/knoppix? Has this been changed in Knoppix so that all settings go to that special settings file it gives me the option to create at boot time?
THANKS!!!!!!!!!!!!
Patti
Great! AFAICT, "that special settings file" you refer to is the "persistent store", which is indeed where all changes you make would persist. However, you shouldn't have to make the changes you refer to in order to run Knoppix - it's designed to run without passwords. You can run anything you like as root, just by prefixing the command with "sudo". My suggestion is to try again, wiping and reinstalling, then boot it up and create a persistent store file, maybe 1-2 GB? That way you'll be able install most any program, etc.
Cheers!
Krishna
-
Junior Member
registered user
"it's designed to run without passwords" - right, but the problem is more complicated than that, for instance, if you use the menu system to start the "Users and Groups" applet, it won't let you change anything. So I edited the menu entry to put "sudo" in front of the command line for the applet and it works fine. But these menu changes don't persist, so I guess I need to use that persistence file? Since it's installed on an 8GB SD drive, and it claims there is 4 Gig left, how big should I make the persistence file? I guess since Knoppix uses FAT32 - the biggest I can make it is ~2GB...
-
Originally Posted by
PattiMichell
"it's designed to run without passwords" - right, but the problem is more complicated than that, for instance, if you use the menu system to start the "Users and Groups" applet, it won't let you change anything. So I edited the menu entry to put "sudo" in front of the command line for the applet and it works fine. But these menu changes don't persist, so I guess I need to use that persistence file? Since it's installed on an 8GB SD drive, and it claims there is 4 Gig left, how big should I make the persistence file? I guess since Knoppix uses FAT32 - the biggest I can make it is ~2GB...
I think that's probably FAT-Ex, M$oft's newer offering (which apparently has been adopted by flash device makers.) There seems to be no FS-related difficulty with large files on my 8GB USB-stick, but I used 2GB for that persistent store anyway, to leave room for both the 4GB KNOPPIX file/folder and some (Windows-accessible) unused FAT space. Knoppix itself can be installed on many if not most FSs, FWIW.
Cheers again!
Krishna
-
Junior Member
registered user
Originally Posted by
krishna.murphy
I think that's probably FAT-Ex, M$oft's newer offering (which apparently has been adopted by flash device makers.) There seems to be no FS-related difficulty with large files on my 8GB USB-stick, but I used 2GB for that persistent store anyway, to leave room for both the 4GB KNOPPIX file/folder and some (Windows-accessible) unused FAT space. Knoppix itself can be installed on many if not most FSs, FWIW.
Cheers again!
Krishna
Hmmm... didn't think I needed to do a persistent store since I have a dedicated SD drive to knoppix. So I gave it a file size during boot in the option to make a persistent settings store file, but it didn't do anything... Should I just create a new user (me)?
-
Originally Posted by
PattiMichell
Hmmm... didn't think I needed to do a persistent store since I have a dedicated SD drive to knoppix. So I gave it a file size during boot in the option to make a persistent settings store file, but it didn't do anything... Should I just create a new user (me)?
It's a fairly subtle thing - you might have missed it. It should create an encrypted file called knoppix-data.aes in the KNOPPIX folder on the SD card, in this case. The next time you boot, it should prompt you for the password you set for that file, then integrate everything inside with the file system you get when it's not there to create the effect of "changeability" without having to allow anything to actually change in the base install file.
Cheers!
Krishna
Last edited by krishna.murphy; 05-22-2010 at 09:47 PM.
Reason: clarity
-
Senior Member
registered user
Originally Posted by
PattiMichell
I guess since Knoppix uses FAT32 - the biggest I can make it is ~2GB...
If your flash device uses FAT32 then your maximum size of single file is 4 GB.
Originally Posted by
PattiMichell
So I gave it a file size during boot in the option to make a persistent settings store file
You have to enter only the integer. The size of the persistent image file is calculated in chunks with a size of 1 MB. Example: If you want to use a persistent image file with a size of 4000 MB then you must enter 4000.
-
Junior Member
registered user
Maybe I forgot to request an encrypted install when I did the to-SD install applet in the Live DVD? I don't remember seeing anything in the applet for a default home either. Maybe I have to do that manually still (even though there's an applet)?
-
Junior Member
registered user
Originally Posted by
klaus2008
If your flash device uses FAT32 then your maximum size of single file is 4 GB.
You have to enter only the integer. The size of the persistent image file is calculated in chunks with a size of 1 MB. Example: If you want to use a persistent image file with a size of 4000 MB then you must enter 4000.
Maybe that's my problem!! I put "2000 MB" since the example shows the "MB" - I'll try again... Does the user always stay "knoppix" or do I create a user "patti" like in other distros?
-
Junior Member
registered user
Ah, got it! During the boot when you specify a size for the persistent file (sans the "MB" I was mistakenly appending), then it asks if you want to encrypt it... THANKS!!!!!!!!!!!!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
CISCO MERAKI MS120-24P-HW 24-PORT GIGABIT CLOUD MANAGED PoE SWITCH - UNCLAIMED
$103.74
Cisco WS-C3750X-48PF-S 48 Port PoE Gigabit Switch w/ C3KX-NM-10G & Dual 1100WAC
$121.88
GENUINE CISCO DS-SFP-FC32G-SW SFP NEW SEALED SEE PHOTOS SHIPS FREE
$69.99
Cisco C9200L-STACK-KIT Stacking Kit New Sealed
$435.57
Cisco Nexus N3K-C3064PQ-10GX 48P 10GbE SFP+ 4P QSFP+ Switch (Fair)
$85.00
🔥🔥🔥 CISCO SFP-10G-SR V03 10-2415-03 850nm 10GBASE-SR SFP+ Multi Module 🔥🔥🔥
$6.80
Cisco C3KX-NM-10G 3K-X Network Module for 3750-X 3560-X
$23.99
Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850
$30.99
Cisco WS-C2960X-48FPD-L 48 V07 POE+ GE+2 10G SFP+, LAN BASE 740W w/ C2960X-Stack
$110.00
Cisco Nexus N9K-C92160YC-X 48P 25GbE SFP28 6P QSFP+/QSFP28 PE Switch
$499.00