try "pppconfig" and then "pon provider-name" .to disconnect poff
I am having problems starting ppp in my debian installed with knx-hdinstall. I can dial in to my server and succesfully login but ppp does not appear to start. I cannot ping or get to any websites. Are there any modules or any pppd config files that I need to set up?
Thanks.
try "pppconfig" and then "pon provider-name" .to disconnect poff
I had the exact problem and not sure exactly how I fixed it. fist if your modem was ttyS4, use ./MAKEDEV ttyS4 to make it, then ln -s ttyS4 modem so kppp can see it. Try chmod 777 to both ttyS4 and modem. try route -n, while your are online you should get 2 lines and they both should end in ppp. try ifconfig eth0 down. try netcardconfig too. If you find out what did it post back. check /etc/resolv.conf to see numbers are good also resolv.conf in /etc/ppp. read man resolv.conf. Try to access google without name 216.239.37.101
Somewhere in there is solution. Don't give up.
Juniper EX2200-C-12T-2G 12 Port L3 EX2200-C Compact Fanless Switch 1YearWarranty
$195.00
Juniper EX4300-24T Layer 3 24 Ports Manageable Ethernet Switch 1 Year Warranty
$195.00
JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER
$210.00
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$40.18
Juniper Networks EX4300-48T 48 Port Gigabit 4 QSFP 40G 2xPSU AFO Network Switch
$89.00
Juniper Networks EX2300-C 12-Port 2XSFP Uplinks PoE+ Switch P/N: EX2300-C-12P
$299.99
Juniper Networks EX3300-24P | 24 Port Gigabit Network Switch w/ Power cord
$53.99
Juniper EX2300-24P Poe+ Rack Mountable Ethernet Switch
$130.00
Juniper QFX5100-48T-AFO 48 100M/1G/10G Base-T 6 QSFP AFO
$485.00
Juniper EX2300-48P PoE+ Switch 48x 1GbE & 4 SFP+/SFP 10G uplinks, Tested
$289.00