try "pppconfig" and then "pon provider-name" .to disconnect poff
I am having problems starting ppp in my debian installed with knx-hdinstall. I can dial in to my server and succesfully login but ppp does not appear to start. I cannot ping or get to any websites. Are there any modules or any pppd config files that I need to set up?
Thanks.
try "pppconfig" and then "pon provider-name" .to disconnect poff
I had the exact problem and not sure exactly how I fixed it. fist if your modem was ttyS4, use ./MAKEDEV ttyS4 to make it, then ln -s ttyS4 modem so kppp can see it. Try chmod 777 to both ttyS4 and modem. try route -n, while your are online you should get 2 lines and they both should end in ppp. try ifconfig eth0 down. try netcardconfig too. If you find out what did it post back. check /etc/resolv.conf to see numbers are good also resolv.conf in /etc/ppp. read man resolv.conf. Try to access google without name 216.239.37.101
Somewhere in there is solution. Don't give up.
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
Dell R630 8SFF 2.4Ghz 12-Core 128GB H330 RAID 10GB RJ-45 NIC 2x750W PSU 8x Trays
$430.04
Dell R630 8SFF 2.4Ghz 20-Core 128GB H730 RAID 10GB RJ-45 NIC 2x750W PSU 8x Trays
$455.04
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$82.49
NEW LSI MEGARAID SAS 9361-8i 12GB/s SAS + SATA RAID CONTROLLER CARD PCIe x8 3.0
$99.00
Yottamaster 4Bay RAID RGB Hard Drive Enclosure Type B Fr 2.5'' 3.5" SATA HDD SSD
$149.99