-
Continuing saga of OS problems and SCSI problems. New TV series coming this Fall.
Thanks again to krishna.murphy for a thourgh and speedy reply.
From what I understand, talking to several of the Debian creaters and others, it has been a general concensus to lock up "root" as an "X" window type format because we're all too clumsy and don't take care enough to watch what we do. So they have to baby sit us and make sure we don't do anything to our system. Of course, they forget I can do a terminal window, type sudo, then "cd /;rm -fr *" and the whole system is gone. They're protection is in the wrong place, needs to be in education, not slapping nuckles with a ruler. But that is their problem. I'll keep trying various suggestions including yours on getting root privelage X programs to run. First thing I think I'll try something other than KDE.
The BIOS problem seems to be wide spread, but most people either have small systems or do not use SCSI. The general problem is, I have SCSI BIOS start, (during boot), and get /dev/sda, /dev/sdb, etc. When the OS starts, that still holds through boot (in some cases). If not, what it is doing is the OS is running a search for all devices that match SCSI drivers (ATA), IDE (new), USB storage, SCSI drives or tape drives and the first one gets assigned /dev/sda, second /dev/sdb, etc. Problem arises, if I happen to have my first item it finds in the sting turned off or on another computer (it's a portable USB drive), this shifts the /dev's back one and now what might have been my boot drive (/dev/sdk2) is now /dev/sdj2 and the system gives me a boot error. I have to correct all devices back to what they were and reboot. If I permanently, remove or re-arrange something, I have to manually change the boot sequence in the OS to the new drive designators. Generally, as I have seen for years, HD's are always handled first and retain their address, peripherals are added as placed or found.
-
Installed Knoppix FULL 6.2.1
In the further saga of installation and running. I have stripped my system bare. It has no SCSI devices except, 4 SCSI drives, which according to the installer, register as /dev/sda, sdb, etc.
I try to boot, looks normal, 4 penguins come up on the screen. One time, it just sits there. Nothing further happens, can't seem to get a text window. Other times, I get the 4 penguins and right under them, "Error: Driver 'pata_platform' is already registered, aborting....."![Confused](images/smilies/confused.png)
and it freezes. I even went into my system BIOS and disabled the SATA and ATA completely. I see the error mentioned many times in blogs, but no answers.
Anyone have ideas?
-
![Quote](images/misc/quote_icon.png)
Originally Posted by
pebl
In the further saga of installation and running. I have stripped my system bare. It has no SCSI devices except, 4 SCSI drives, which according to the installer, register as /dev/sda, sdb, etc.
I try to boot, looks normal, 4 penguins come up on the screen. One time, it just sits there. Nothing further happens, can't seem to get a text window. Other times, I get the 4 penguins and right under them, "Error: Driver 'pata_platform' is already registered, aborting....."
![Confused](images/smilies/confused.png)
and it freezes. I even went into my system BIOS and disabled the SATA and ATA completely. I see the error mentioned many times in blogs, but no answers.
Anyone have ideas?
Two things:
1) The four penguins should be indicating separate cores/processors, AFAIK. I'm not exactly sure, but I'm remembering something about needing a multi-processor-enabled kernel in that case, which is not the standard Knoppix kernel. Hopefully one of the true gurus will see this and jump in.
2) Are you booting from a CD, or is it a partition on one of the SCSI drives, as it sounds? If you have copied stuff to a magnetic drive, how did you do it? There are more ways than one to make it work, but it'll take some doing, I think; which way to go depends on what's been done before.
Cheers!
Krishna
-
Reply to several posts - Installs with SCSI
First of all, I'd like to thank all the heads that have gone together to present ideas. That's what TEAM work is for and what these BLOGS are all about.
Now the problem at hand. I have a Xandros (Debian) 2.6.24 kernel and my system is at sid/squeeze. Many of my problems went away when I updated the distro, but I don't seem to be able to update the kernel. Always has something wrong by the time I get to boot time.
Why a new kernel and distro, you ask, I now am delving into several types of programs, that I try to install and getting errors like, "You need 2.6.26 or greater kernel" or similar type messages. I am also, built from an original Xandros 4.2 desktop, upgrade, after upgrade. I have part of Xandros, exatras and part of a standard Debian system. Would like to get all on one page.
As far as HD settings go, the SCSI BIOS, gives me no options, the system BIOS had no drives other than 2 CD drives Seemingly, in the Xandros distro, it is correctly, keeping the HD's as /dev/sda, sdb, etc. and then adding any SCSI-like items later. I did check the grub and other control files after installation of several versions and all looked right, of course, I disconnected everything but my SCSI drives. I don't think it had a choice. Once I start plugging USB items back in, there go the drive letters. Back where I started from. BTW, I am installing on 1 drive (SCSI), has partition for swap, one for root/boot. It's 36GB total, so no size issues. Nothing else on the drive.
-
The partitioner must be improved, though. There must be a "manual" option, since we may have the partitions prepared in advance. The way it is up to 6.7, it does as "he" wants, not us!?
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![Fanxiang 4TB 2TB 1TB SSD 550MB/s 2.5'' SATA III Internal Solid State Drive lot picture](/store/img/g/pB0AAOSwrbRkIWhk/s-l225/Fanxiang-4TB-2TB-1TB-SSD-550MB-s-2-5-SATA-III-Inte.jpg)
Fanxiang 4TB 2TB 1TB SSD 550MB/s 2.5'' SATA III Internal Solid State Drive lot
$188.99
![Netac 2TB 1TB 512GB 240GB Internal SSD 2.5'' SATAIII 6Gb/s Solid State Drive lot picture](/store/img/g/pJUAAOSwFaRkhuj-/s-l225/Netac-2TB-1TB-512GB-240GB-Internal-SSD-2-5-SATAIII.jpg)
Netac 2TB 1TB 512GB 240GB Internal SSD 2.5'' SATAIII 6Gb/s Solid State Drive lot
$118.99
![Fanxiang SSD 4TB 2TB 1TB 512GB SATA SSD 2.5'' III Internal Solid State Drive lot picture](/store/img/g/pB0AAOSwrbRkIWhk/s-l225/Fanxiang-SSD-4TB-2TB-1TB-512GB-SATA-SSD-2-5-III-In.jpg)
Fanxiang SSD 4TB 2TB 1TB 512GB SATA SSD 2.5'' III Internal Solid State Drive lot
$108.29
![4 TB SSD SATA III Drive 2.5](/store/img/g/3EQAAOSwjNlmAztr/s-l225/4-TB-SSD-SATA-III-Drive-2-5-Solid-State-Drive-SATA.jpg)
4 TB SSD SATA III Drive 2.5" Solid State Drive SATAIII 6Gb/s UP to 540MB/s
$148.00
![Patriot P210 128GB 256GB 512GB 1TB 2TB 2.5](/store/img/g/RzIAAOSwSZNlN-zB/s-l225/Patriot-P210-128GB-256GB-512GB-1TB-2TB-2-5-SATA-3-.jpg)
Patriot P210 128GB 256GB 512GB 1TB 2TB 2.5" SATA 3 6GB/s Internal SSD PC/MAC Lot
$13.99
![Fanxiang M.2 SATA SSD 2TB 1TB 512GB 256GB SSD Internal M2 Solid State Drive Lot picture](/store/img/g/vt0AAOSwAgVls0tY/s-l225/Fanxiang-M-2-SATA-SSD-2TB-1TB-512GB-256GB-SSD-Inte.jpg)
Fanxiang M.2 SATA SSD 2TB 1TB 512GB 256GB SSD Internal M2 Solid State Drive Lot
$21.99
![Samsung 870 EVO 500GB 2.5 Inch SATA III Internal SSD Brand New MZ-77E500B/AM picture](/store/img/g/8koAAOSwV61maW9l/s-l225/Samsung-870-EVO-500GB-2-5-Inch-SATA-III-Internal-S.jpg)
Samsung 870 EVO 500GB 2.5 Inch SATA III Internal SSD Brand New MZ-77E500B/AM
$34.98
![Netac 1TB 2TB 512GB Internal SSD 2.5'' SATA III 6Gb/s Solid State Drive lot picture](/store/img/g/pJUAAOSwFaRkhuj-/s-l225/Netac-1TB-2TB-512GB-Internal-SSD-2-5-SATA-III-6Gb-.jpg)
Netac 1TB 2TB 512GB Internal SSD 2.5'' SATA III 6Gb/s Solid State Drive lot
$13.99
![Fanxiang SSD 512GB 1TB 2TB 4TB 2.5'' SSD SATA III Internal Solid State Drive lot picture](/store/img/g/pB0AAOSwrbRkIWhk/s-l225/Fanxiang-SSD-512GB-1TB-2TB-4TB-2-5-SSD-SATA-III-In.jpg)
Fanxiang SSD 512GB 1TB 2TB 4TB 2.5'' SSD SATA III Internal Solid State Drive lot
$107.99
![Fanxiang 2TB 1TB 512GB 550MB/S MSATA SSD Solid State Drive 6Gb/s PC/Laptop lot picture](/store/img/g/PxcAAOSweQ5kVhXe/s-l225/Fanxiang-2TB-1TB-512GB-550MB-S-MSATA-SSD-Solid-Sta.jpg)
Fanxiang 2TB 1TB 512GB 550MB/S MSATA SSD Solid State Drive 6Gb/s PC/Laptop lot
$104.49