-
Error 17 at GRUB boot
I installed, with no errors, Adrianne Knoppix. Everything fine till reboot. Rebooted, and got
Stage 1.5
Booting
Error 17:
I went back and looked at the grub files and the names and addresses appeared to be right, but error 17, is file not found, but it doesn't list WHICH FILE, Anyone with similar install issues?
-
![Quote](images/misc/quote_icon.png)
Originally Posted by
pebl
I installed, with no errors, Adrianne Knoppix.
Q 1. What form of install did you use? Do I understand that the hard disk was involved, possibly with some re-partitioning? Or did you perhaps use the flash-install utility, and/or flash drive?
Q 2. Are you (or someone in your household) visually impaired? Adrianne is a screen-reader version of Knoppix that is not right for everyone.
Everything fine till reboot. Rebooted, and got
Stage 1.5
Booting
Error 17:
I went back and looked at the grub files and the names and addresses appeared to be right, but error 17, is file not found, but it doesn't list WHICH FILE, Anyone with similar install issues?
Usually, it makes sense to "install Knoppix-Linux to hard drive" only if you plan to modify the system and re-master, e.g. make your own version of Knoppix (which is fine, the more the merrier.) I hope you haven't lost functionality! In the event that you intended to dual-boot Linux and (say) Windows, your problem might have been caused by a difficulty with the "mode" of the hard drive; see the Ubuntu problem/fix summary if so.
Cheers!
Krishna ![Mr. Green](images/smilies/icon_mrgreen.gif)
p.s. There is an option to copy the CD/DVD files to the hard drive, e.g.
Code:
knoppix tohd=/dev/sda1
which would copy to the first partition on the first hard drive; after that first time, you could boot the CD and type
Code:
knoppix fromhd=/dev/sda1
This gives you the speed of a hard drive (minus a little overhead for decompressing the filesystem, etc.) while avoiding the difficulty of "permanent" partitioning, and allowing Knoppix to co-exist with some other OS's filesystem (but not NTFS, hopefully - that's considered risky.) This can be made into a normal-seeming multi-boot setup as described here.
-
1. The hard drive is involved. I'm trying to install it on my SCSI (0) which is at /dev/sdkx. Just to be safe, I used gparted to wipe the drive and created a swap and root system with a boot area on root. This was the FULL Knoppix 6.2.1 CD install.
2. I tried Adrianne and it's really annoying to listen to. I turned the volume off. I installed that, rebooted, the 4 penguins came up and it froze. No response from keyboard at all. Can't get any log files.
3. No, I'm strictly an "IX" guy. Don't want anything to do with Windows at all. This is not a dual boot either. Strictly one OS, one boot partition. Root and two swap area take up an entire drive. I am willing to put the time in to completely convert all my software installed previously to what Knoppix requires. I need the upgrade.
4. Trying to install Knoppix FULL onto single disk now and boot. It's not even got GRUB done right. In my scheme (setup), I answered what would be /dev/sdk0 as swap, sdk1 as root and boot. I just booted and it's trying to load boot from root (hd4.1) which should be (with my pseudo-SCSI) items, hd(10,1) or if it's just looking at the SCSI hd's, should be hd(0,1). Installation goes off with out a problem.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![HP ProLiant BL460c Gen9 Blade 2x E5-2690v4 2.6GHz =28 Cores 32GB P246 650FLB picture](/store/img/g/ofQAAOSw62Rk0wlt/s-l225/HP-ProLiant-BL460c-Gen9-Blade-2x-E5-2690v4-2-6GHz-.jpg)
HP ProLiant BL460c Gen9 Blade 2x E5-2690v4 2.6GHz =28 Cores 32GB P246 650FLB
$223.00
![DELL PEM640 POWEREDGE M640 BLADE SERVER picture](/store/img/g/i6wAAOSwo4NmKmrs/s-l225/DELL-PEM640-POWEREDGE-M640-BLADE-SERVER.jpg)
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
![Sun Microsystems Blade 100 Workstation UltraSPARC-IIe 500MHz 256MB Server No HDD picture](/store/img/g/QnoAAOSw0mFmYklK/s-l225/Sun-Microsystems-Blade-100-Workstation-UltraSPARC-.jpg)
Sun Microsystems Blade 100 Workstation UltraSPARC-IIe 500MHz 256MB Server No HDD
$95.00
![Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W picture](/store/img/g/9HsAAOSw3OZmMT~n/s-l225/Dell-PowerEdge-FX2s-CTO-Blade-4-Slot-2U-Chassis-2x.jpg)
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
![HP ProLiant BL460c Gen9 Blade Server Intel Xeon E5-2698 v3 - 512GB RAM picture](/store/img/g/lasAAOSwj1hmYhKc/s-l225/HP-ProLiant-BL460c-Gen9-Blade-Server-Intel-Xeon-E5.jpg)
HP ProLiant BL460c Gen9 Blade Server Intel Xeon E5-2698 v3 - 512GB RAM
$255.61
![Dell PowerEdge M620 Blade Server 2x 10C E5-2690v2 64GB Ram 2x 600GB 10k HDD picture](/store/img/g/JBcAAOSwdu1mXLZT/s-l225/Dell-PowerEdge-M620-Blade-Server-2x-10C-E5-2690v2-.jpg)
Dell PowerEdge M620 Blade Server 2x 10C E5-2690v2 64GB Ram 2x 600GB 10k HDD
$125.00
![Google Search Appliance - Dell PowerEdge R710 x2 Xeon X5690 192GB Memory 6TB HDD picture](/store/img/g/GiMAAOSwhXNl7lu2/s-l225/Google-Search-Appliance-Dell-PowerEdge-R710-x2-Xeo.jpg)
Google Search Appliance - Dell PowerEdge R710 x2 Xeon X5690 192GB Memory 6TB HDD
$529.99
![Cisco UCSB-B200-M5 V05 Blade Server with 2x GOLD 6146, 3.2GHZ 64GB RAM, NO SSD picture](/store/img/g/7G8AAOSweShmchaI/s-l225/Cisco-UCSB-B200-M5-V05-Blade-Server-with-2x-GOLD-6.jpg)
Cisco UCSB-B200-M5 V05 Blade Server with 2x GOLD 6146, 3.2GHZ 64GB RAM, NO SSD
$595.00
![DELL PowerEdge M630 Blade 2x E5-2680v4 2.4GHz =28 Cores 128GB H330 2x10Gb X520 picture](/store/img/g/GmIAAOSwC8Jk0V~~/s-l225/DELL-PowerEdge-M630-Blade-2x-E5-2680v4-2-4GHz-28-C.jpg)
DELL PowerEdge M630 Blade 2x E5-2680v4 2.4GHz =28 Cores 128GB H330 2x10Gb X520
$275.00
![DELL POWEREDGE M630 BLADE 2x 12 CORE E5-2690 v3 2.6GHz 24X16GB 384GB RAM NO HDD picture](/store/img/g/iZkAAOSwF4dmbao5/s-l225/DELL-POWEREDGE-M630-BLADE-2x-12-CORE-E5-2690-v3-2-.jpg)
DELL POWEREDGE M630 BLADE 2x 12 CORE E5-2690 v3 2.6GHz 24X16GB 384GB RAM NO HDD
$399.00