The easiest solution is to append the command in /etc/rc.local - it will load it, but it's not the right one
Hello,
I'm booting "knoppix desktop=kde" on a Dell Dimension 2350, and the ethernet module doesn't load at boot time. I can connect afterwards by loading the module manually
# modprobe b44
# dhclient eth0
Is there a way to make this b44 module load automatically at boot time? (A boot parameter, I'm hoping?)
Thanks,
Paul
# lspci -v
==cut==
01:09.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01)
Subsystem: Dell Device 0127
Flags: bus master, fast devsel, latency 32, IRQ 17
Memory at ed000000 (32-bit, non-prefetchable) [size=8K]
[virtual] Expansion ROM at 18000000 [disabled] [size=16K]
Capabilities: [40] Power Managemetn version 2
Kernel modules: b44
The easiest solution is to append the command in /etc/rc.local - it will load it, but it's not the right one
There is a file /etc/modules. Maybe you can add a line with the name of your module so that it is loaded at boot time.
I can see now that b44 driver is blacklisted by default. You can edit /etc/modprobe.d/broadcom-sta-common.conf and put # in front of b44.
This should do the trick, if not use the rc.local
And I just notice now the response from klaus2008. You can add b44 in /etc/modules, but still the first thing I would try is to unblacklist it
Last edited by mecho; 06-27-2010 at 09:53 AM.
Intel Xeon E5-2697 v4 2.3GHz 18-Core Processor CPU LGA2011 SR2JV
$49.99
Dell Intel® Xeon® Processor E5-2698 v4 Lightly Used
$64.00
Intel - Core i9-14900K 14th Gen 24-Core 32-Thread - 4.4GHz (6.0GHz Turbo) Soc...
$533.99
AMD Ryzen 7 7800X3D Processor (5 GHz, 8 Cores, Socket AM5), New /Sealed
$309.99
10th GEN INTEL Core i5-10400F 2.9GHz Socket-1200 Desktop CPU SRH3D Processor
$69.99
Intel Core i5 Gen 10 I5-10505 3.20 GHz Comet Lake SRH38 FCLGA1200 Processor Used
$60.84
Intel i7-3770 SR0PK 3.40GHz 8MB 4-Core LGA1155 Socket CPU Processor
$29.99
Intel - Core i5-14600K 14th Gen 14-Core 20-Thread - 4.0GHz (5.3GHz Turbo) Soc...
$305.99
Intel Xeon E5-2667 V4 SR2P5 (3.2GHZ/8-CORE/25MB/135W) PROCESSOR CPU
$28.99
Intel Xeon E5-2667 V4 SR2P5 (3.2GHZ/8-CORE/25MB/135W) PROCESSOR CPU
$29.89