The easiest solution is to append the command in /etc/rc.local - it will load it, but it's not the right one
Hello,
I'm booting "knoppix desktop=kde" on a Dell Dimension 2350, and the ethernet module doesn't load at boot time. I can connect afterwards by loading the module manually
# modprobe b44
# dhclient eth0
Is there a way to make this b44 module load automatically at boot time? (A boot parameter, I'm hoping?)
Thanks,
Paul
# lspci -v
==cut==
01:09.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01)
Subsystem: Dell Device 0127
Flags: bus master, fast devsel, latency 32, IRQ 17
Memory at ed000000 (32-bit, non-prefetchable) [size=8K]
[virtual] Expansion ROM at 18000000 [disabled] [size=16K]
Capabilities: [40] Power Managemetn version 2
Kernel modules: b44
The easiest solution is to append the command in /etc/rc.local - it will load it, but it's not the right one
There is a file /etc/modules. Maybe you can add a line with the name of your module so that it is loaded at boot time.
I can see now that b44 driver is blacklisted by default. You can edit /etc/modprobe.d/broadcom-sta-common.conf and put # in front of b44.
This should do the trick, if not use the rc.local
And I just notice now the response from klaus2008. You can add b44 in /etc/modules, but still the first thing I would try is to unblacklist it
Last edited by mecho; 06-27-2010 at 09:53 AM.
Dell PowerEdge R730 2x E5-2699V3 2.3Ghz 36 Core 128GB RAM H730 X520-I350 2x750W
$329.99
Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays
$159.99
Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config
$447.99
Dell Poweredge R630 2x Xeon E5-2680 v4 2.4ghz 28-Cores / 128gb / H330 / 2x 1TB
$334.99
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD
$197.99
DELL R630 SERVER 8 x 2.5'' 2X E5-2680V4 32GB RAM IDRAC ENT & NDC 2X 495W PSU
$184.95
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 240GB SSD 2x 10GBE
$259.00
DELL PowerEdge R630 8SFF Server 2x E5-2690v4 2.6GHz =28 Cores 256GB H730 4xRJ45
$562.00
Dell PowerEdge T620 8-Bay LFF Xeon E5-2660 0 2.20GHz 48GB NO HDD S110 Server
$174.99