-
Senior Member
registered user
Booting from HDD using Grub with Knoppix DVD folders copied in HDD
Dear friends,
The issue is bit complex. Recently I have learnt to boot knoppix from a computer (i.e., from HDD) running Debian Lenny 5.0.4 with Grub as boot loader without (1) either installing it on the HDD as Debian, (2) or copying its iso image on the HDD and using cheatcode to boot the OS. What I do is copy the contents of the Knoppix DVD to the HDD and edit the grub menu.lst to boot the knoppix from HDD using Grub. >>>>>>>>> and I noticed that knoppix runs faster this way! <<<<<<<<<<
Of course, knoppix is very versatile, so the option is available to me, but I have run into a problem because of the whole lot of choice available to me.
The link to the Debian forum where I learnt the trick is:
[solved] Using Grub to boot from an iso image
Link: http://forums.debian.net/viewtopic.php?f=5&t=52419
I have several computers at home, including one desktop, two laptops and two HCL MiLeap ML03 netbooks. All the computers boot the knoppix the way I have stated above, easily, except the netbooks [make of HDD: PM-ST730212DE, and have three partitions, two ext2 and one swap] . For the Netbooks we reach the point:
Waiting (USB)...
Searching Knoppix 6 in: /dev/sda1
Searching Knoppix 6 in: /dev/sda2
Searching Knoppix 6 in: /dev/sda3
Could not mount disk to /mnt-system. Starting debugging shell...
sh: can't access tty; job control turned off
/#
But, interestingly, in between the search if I insert the pen drive where the knoppix folders are copied, the OS boots from the pen drive.
Also, in Debian, the partitions are identified as hda1 and hda2.
I searched the net and found that the HDD is of Seagate, details: Seagate Lyrion ST730212DE - hard drive - 30 GB. Link: http://www.seagate.com/staticfiles/s...100462437b.pdf
So could you please guide me as to where I am going wrong?
Regards,
Rajib
Last edited by rajibando; 07-07-2010 at 04:42 PM.
-
Rajib-
I'd suggest using the flash-install utility (on the main menu under Preferences) to put it on the hard drive. That requires a FAT32 partition big enough for the ISO (plus whatever persistent store and spare room you want) as the first partition. It also sets up GRUB to boot that first partition, and has the advantage that there are many others who are familiar with the setup.
Cheers!
Krishna
-
Senior Member
registered user
Booting from HDD using Grub with Knoppix DVD folders copied in HDD
Dear Mr. Murthy,
Thank you very much for your quick reply. I am aware of the the other installation options, but deliberately chose not to exercise those options.
The option I chose is a very well thought out plan, and works for me for the other computers. The failure also gives me an opportunity to learn doing things.
Knoppix boots from my HCL Me laptop from ext2 partition, and also from my Compaq Presario CT501 laptop from fat32 partition, and using the same method I have already described.
Incidentally, both the laptops' HDDs I mentioned about are SATA HDDs, while the one on my MiLeap netbooks are IDE.
Is this what is creating the problem?
PLEASE, for the sake of FOSS, kindly identify the true reason for this and educate me. Try to visualise the problem I have sited in my first post, and if necessary I would be able to provide the video of the entire uploading process.
Regards
Last edited by rajibando; 07-08-2010 at 01:25 AM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
SUPERMICRO CSE-512 AMD Opteron Processor 6128, 32GB DDR3 RAM NO HDD
$90.00
HPE ProLiant MicroServer Gen8 Intel Xeon E3-1265L 16GB ECC PCIe x16 4x1TB HDD
$249.99
HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVES
$199.99
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon
$846.19
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ*
$94.99
Supermicro 5018A-FTN4 Rack Server - Black
$125.00
Microsel Server Tower Supermicro X10SAE E3-1275 V3 @3.5GHz 16GB 509849-001
$149.99
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00
Supermicro CSE-118 2x E5-2698v3 128GB Ram 2x Nvidia Tesla K80 GPU 1U Rack Server
$880.00