Greetings Knoppix Forums,
I am a fan of Knoppix.
Recently I installed 6.2.1 to a 4Gb pen drive.
It boots and runs flawlessly on my old Dell Pentium M's.
However it has a fatal issue with my newer Dell Turion 64 about 2 seconds into boot. I tried booting failsafe and without hardware detection to no avail.
(Guess that is an obvious enough message from sh.)Linux Kernel 2.6.32.6, 1895 MB RAM
CPU 0: AMD Turion 64 X2 Mobile Technology TL-60 @ 1994MHz, 512 KB Cache
Knoppix 6 found at: /dev/sda1
. . .
insmod: cannot insert ' /mnt-system/KNOPPIX/modules/cloop.ko': Invalid module format (-1): Exec format error
Could not mount /mnt-system/KNOPPIX/KNOPPIX. Starting debugging Shell . . .
sh: can't access tty; job control turned off
I have been using and tinkering with Debian for 5 or 6 years but I am not real techie so I am hopping for some pointers!
Regards,
Freeman
Yep. Right in front of my face.
So I searched my Vista partition for Knoppix. But /dev/sda1 was a hidden 48MB partition with a failed install that must have been a mistaken attempt during install to Pen Drive. I had to un-hide it /dev/sda1 with gparted because Vista is, well, Vista.
All is good. Knoppix rocks!
Thanks!
LSI 9305-16i SATA SAS 12Gbs RAID Controller Host Bus Adapter PCIe 3.0 x8 IT-Mode
$199.99
Dell R630 8SFF 2.4Ghz 20-Core 128GB H730 RAID 10GB RJ-45 NIC 2x750W PSU 8x Trays
$455.04
Dell R630 8SFF 2.6Ghz 20-Core 192GB H730 RAID 10GB RJ-45 NIC 2x750W PSU 8x Trays
$509.04
Dell R630 8SFF 1.8Ghz 20-Core 192GB H730 RAID 10GB RJ-45 NIC 2x750W PSU 8x Trays
$575.04
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRaid 9361-8i 12Gbps SAS / SATA Raid Controller PCIe x8 3.0 Tested
$29.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$87.99
4 Bay RAID External Hard Drive Enclosure for 2.5/3.5" SATA HDD/SSD
$79.99
ARECA ARC-1882IX-24 SAS PCIE RAID Controller
$150.00