You may be right.
But I think one should first try to see if 'it just works'
without getting into changing any files.
I was delighted to find out in my case it did.
utu....in the network monitor there is only the networking string and not the wireless one which appears on my other notebook...this means the driver is not initialized i think
meco....if i modify that file and then reboot....changes are not saved...it seems that my usb knoppix has no persistence....why?
You may be right.
But I think one should first try to see if 'it just works'
without getting into changing any files.
I was delighted to find out in my case it did.
finally i found how to make it work:
0) ethernet connection
1) aptitude update
2) aptitude install wireless-tools
3) aptitude install firmware-b43-installer (accept package even if older and accept second package suggested)
4) modprobe b43 (the only string to be repeated at every startup....maybe this depends on the blacklist)
thanks all guys
Well done - welcome to Knoppix
If you experience any erratic behavior of your internet connection it would be because you have both wl and b43 drivers loaded.You will have to find a way to blacklist wl - I never had b43 card and its just a guess.
For auto loading of modprobe b43 you might want to put the command in /etc/rc.local
Last edited by mecho; 07-27-2010 at 06:15 PM.
I echo that 'Well Done' to both titomax82 and mecho.
I also offer the following as a summary for later BCM43XX readers:
There are two useful answers in this thread:
1. If the result of the command 'dmesg|grep -i bcm' includes the phrase
'BCM4315' you can expect Knoppix 6.2.1 to take care of you
right out of the box with no tweaks.
1. If the result of the command 'dmesg|grep -i bcm' includes the phrase
'BCM4318' you can follow the approach mecho & titomax82
have delineated here.
Hello to all, what a great distro! have read along for awhile my first Knoppix install was v6.43 live cd to newer laptop HD. Then weeks latter another great release v6.44 dvd to upgrade that cd and all works well. Even got to keep "davyboy's" art work with the upgrade. Couldn't figure out why lost it on initial cd install had 10G partition with 2G swap. Have same problem as above now with older laptop using BCM4318. My question is will this http://wicd.sourceforge.net/download.php work without mecho & titomax82, et al fix? Any other fix come along? thanks jim
@jim3630
Probably most folks here are using network manager, rather than wicd.
I notice wicd is available on synaptic, so you could try that.
You may have to disable network manager to avoid a conflict.
If you go the wicd route, let us know if this approach works for you.
Utu, thanks for the info. Which network manager do you think most folks use? Rather than try something novel first would rather follow the proved path. But if I do try wicd will keep udaterd. thanks jim
@jm3630
See post #15.
Network manager is assumed there.
AFAIK that answer is still correct in that context.
Good luck, anyway.
HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVES
$199.99
HPE ProLiant MicroServer Gen8 Intel Xeon E3-1265L 16GB ECC PCIe x16 4x1TB HDD
$249.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon
$802.70
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Pent
$651.42
Open Eye OE-MTX08 8TB Micro Server With Linux (Boots To Login) No Accessories
$294.95
Supermicro CSE 823-6 2U 6 Bay Chassis ,1xPWS 653-2H 650Wsold as in the photo,
$119.75
Supermicro 5018A-FTN4 Rack Server - Black
$125.00
Supermicro 1U X11DPU 2x Xeon Gold 6132 2.6GHz / 128gb / 10x 2.5 Trays / 2x 750w
$649.99
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00