Page 1 of 2 12 LastLast
Results 1 to 10 of 20

Thread: Knoppix and my wireless adapter problem

  1. #1
    Junior Member
    Join Date
    Jul 2010
    Posts
    7

    Knoppix and my wireless adapter problem

    Hi all, I'm new to Knoppix and new to linux environment in general.

    My notebook is an Acer Aspire 5024WLMi (5020 series) with a Broadcom BCM4318 wireless adapter, and I run Knoppix 6.2.1 (CD, DVD, USB... I have them all . I know there are already lots of guide for wlassistant or ndiswrapper, but there's always something wrong or something missing for a very noob user like me.

    Two questions:

    1) Is there any Knoppix release that already has a driver support for my wlan card? (an already done release or at least someone who can modify the latest release to make it work for my card?)

    or

    2)Is there someone who can help me step-by-step, very deeply step-by step , configuring my wireless to work?

    Please help

  2. #2
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    titomax82

    I know a lot of people have trouble with Broadcom wifi,
    but I think you are in luck. I think the BCM 4318 is provided with
    a native driver in Knoppix 6.2.1.

    1. I don't think you need ndiswrapper.
    2. Maybe you just need to know how to work with Network Manager.
    3. First of all, how did you get here? Ethernet? Router?

  3. #3
    Junior Member
    Join Date
    Jul 2010
    Posts
    7
    I want to connect to my Netgear Wireless DG834PN router... how can i do?

  4. #4
    Junior Member
    Join Date
    Jul 2010
    Posts
    7
    I get here with the same notebook using wireless in windows

  5. #5
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    198
    Open /etc/modprobe.d/broadcom-sta-common.conf and comment out the line that says : blacklist b43
    That should work for you. Please write back if it does not as there are other ways to fix this

  6. #6
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    @mecho

    I have a bcm43xx card.
    I don't think you want to go that way.

  7. #7
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    I have a BCM 4315.
    Here's what my /etc/modprobe.d/broadcom-sta-common.conf looks like.

    # wl module from Broadcom conflicts with ssb
    # We must blacklist the following modules:
    blacklist b44
    blacklist b43legacy
    blacklist b43
    blacklist ssb
    install wl /sbin/modprobe --ignore-install wl $CMDLINE_OPTS

    It ends up installing wl, and lib80211_crypt_tkip.
    I think this is standard Knoppix 6.2.1 issue, not my invention.
    Works fine for me.

    It's not 'native' as I thought, obviously, but I'm no purist.

  8. #8
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    198
    Well for what I know is that the latest b43 driver works well even with bcm4318. He can google it again - there is tons of information about this specific wireless card especially in ubuntu forums. What I see as solution is that many people just remove it from restricted drivers and it works just fine. If it does not - there is no damage done

  9. #9
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    My Laptop has a BCM 4315 wireless card.

    I loaded my Knoppix 6.2.1 CD.
    Waited for a while until a desktop appeared.
    Shortly a Network Manager applet also appeared on the lower right panel.
    Almost immediately a notice 'Wireless network available' also appeared.
    Clicked this applet and selected my ESSID by name.
    Next a panel appeared asking for my WEP key which I provided.
    Clicked connect.
    Another panel asked for a passwork and I declined.
    Waited a short while with animated applet circling.
    Very shortly the applet was showing three bars.
    Then I started typing this note using Leafpad.

    When I'm done typing I'll do the following:
    Fire up a browser.
    Find and Log into Knoppix forum.
    Post this note.

    I declare I have not changed any configuration files or such.
    This thing just works.
    I hope it does the same for you, titomax82.

    tada!
    Last edited by utu; 07-27-2010 at 04:04 AM.

  10. #10
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    198
    @Utu

    He has BCM4318 card. It is not supported by broadcom-wl, but it is by b43.All he needs to do is make sure he has b43-fwcutter and firmware-b43-installer, then uncomment the b43 driver. But I might be wrong. I do not own broadcom card

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Grandstream GS-HT802 2 Port Analog Telephone Adapter VoIP Phone & Device, Black picture

Grandstream GS-HT802 2 Port Analog Telephone Adapter VoIP Phone & Device, Black

$32.00



POLYCOM - VOIP POLY EDGE E350 IP PHONE #2200-87010-025 picture

POLYCOM - VOIP POLY EDGE E350 IP PHONE #2200-87010-025

$145.00



Yealink T53W IP Phone, 12 VoIP Accounts. 3.7-Inch Display w/o Adapter - Black picture

Yealink T53W IP Phone, 12 VoIP Accounts. 3.7-Inch Display w/o Adapter - Black

$59.99



Yealink T54W IP Phone, 16 VoIP Accounts. 4.3-Inch Color Display - Black picture

Yealink T54W IP Phone, 16 VoIP Accounts. 4.3-Inch Color Display - Black

$98.99



Cisco CP-7841 VoIP Phone PoE IP Business Phone Great Condition Mult. Available picture

Cisco CP-7841 VoIP Phone PoE IP Business Phone Great Condition Mult. Available

$19.99



Yealink T53W IP Phone, 12 VoIP Accounts. 3.7-Inch Display w/Power Adapter - Blk picture

Yealink T53W IP Phone, 12 VoIP Accounts. 3.7-Inch Display w/Power Adapter - Blk

$45.00



Lightly Used Cisco 8811 Series VoIP phone Factory Reset great condition  picture

Lightly Used Cisco 8811 Series VoIP phone Factory Reset great condition

$21.00



Cisco CP-7965 VOIP Phone | With Stand and Handset | Business IP Phone 7965 picture

Cisco CP-7965 VOIP Phone | With Stand and Handset | Business IP Phone 7965

$19.95



Cisco DX650 VoIP HD Touchscreen Video Phone - Android WiFi picture

Cisco DX650 VoIP HD Touchscreen Video Phone - Android WiFi

$45.00



Cisco SPA504G 4-Line IP Phone with 2-Port Switch, PoE, LCD Display &Power Supply picture

Cisco SPA504G 4-Line IP Phone with 2-Port Switch, PoE, LCD Display &Power Supply

$21.00