You may be right.
But I think one should first try to see if 'it just works'
without getting into changing any files.
I was delighted to find out in my case it did.
utu....in the network monitor there is only the networking string and not the wireless one which appears on my other notebook...this means the driver is not initialized i think
meco....if i modify that file and then reboot....changes are not saved...it seems that my usb knoppix has no persistence....why?
You may be right.
But I think one should first try to see if 'it just works'
without getting into changing any files.
I was delighted to find out in my case it did.
finally i found how to make it work:
0) ethernet connection
1) aptitude update
2) aptitude install wireless-tools
3) aptitude install firmware-b43-installer (accept package even if older and accept second package suggested)
4) modprobe b43 (the only string to be repeated at every startup....maybe this depends on the blacklist)
thanks all guys
Well done - welcome to Knoppix
If you experience any erratic behavior of your internet connection it would be because you have both wl and b43 drivers loaded.You will have to find a way to blacklist wl - I never had b43 card and its just a guess.
For auto loading of modprobe b43 you might want to put the command in /etc/rc.local
Last edited by mecho; 07-27-2010 at 06:15 PM.
I echo that 'Well Done' to both titomax82 and mecho.
I also offer the following as a summary for later BCM43XX readers:
There are two useful answers in this thread:
1. If the result of the command 'dmesg|grep -i bcm' includes the phrase
'BCM4315' you can expect Knoppix 6.2.1 to take care of you
right out of the box with no tweaks.
1. If the result of the command 'dmesg|grep -i bcm' includes the phrase
'BCM4318' you can follow the approach mecho & titomax82
have delineated here.
Hello to all, what a great distro! have read along for awhile my first Knoppix install was v6.43 live cd to newer laptop HD. Then weeks latter another great release v6.44 dvd to upgrade that cd and all works well. Even got to keep "davyboy's" art work with the upgrade. Couldn't figure out why lost it on initial cd install had 10G partition with 2G swap. Have same problem as above now with older laptop using BCM4318. My question is will this http://wicd.sourceforge.net/download.php work without mecho & titomax82, et al fix? Any other fix come along? thanks jim
@jim3630
Probably most folks here are using network manager, rather than wicd.
I notice wicd is available on synaptic, so you could try that.
You may have to disable network manager to avoid a conflict.
If you go the wicd route, let us know if this approach works for you.
Utu, thanks for the info. Which network manager do you think most folks use? Rather than try something novel first would rather follow the proved path. But if I do try wicd will keep udaterd. thanks jim
@jm3630
See post #15.
Network manager is assumed there.
AFAIK that answer is still correct in that context.
Good luck, anyway.
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
Dell PowerEdge R630 8SFF 2.6Ghz 20-Core 128GB Mem 2x10G+2x1G NIC 2x750W PSU
$399.04
Dell PowerEdge R920 24 SFF 4x E7-8891 v2 3.2GHz =40 Cores 1024GB No HDD H730P
$985.00
Intel XEON E5-2699 V3 CPU PROCESSOR 18 CORE 2.30GHZ 45MB L3 CACHE 145W SR1XD
$45.00
Intel Xeon E5-2680 v4 2.4GHz 35MB 14-Core 120W LGA2011-3 SR2N7
$17.99
Intel Xeon E5-2699v4 SR2JS 2.2GHz 22-Core 55MB 145W Server Processor CPU
$144.95
Intel Xeon Gold 6126 2.6 GHz LGA 3647 Server CPU Processor SR3B3
$17.99
Intel Xeon Gold 6140 SR3AX 2.3GHz 18-Core Processor CPU
$39.99
INTEL XEON GOLD 6240 2.6GHZ PROCESSOR | SRF8X
$399.99
Dell Precision T5600/t5610 Xeon E5-2670 2.6Ghz 16GB DDR3 RAM NO HDD Nvidia
$90.00