-
Senior Member
registered user
@klaus2008
If I understand correctly, the /etc/init.d/knoppix-startx file
has a single long line to which you merely add material via a tee command.
I dont look for every instance of 'startx', do I?
And that I should save a copy of the init.d file before so editing.
Have I got that right?
Last edited by utu; 07-31-2010 at 12:13 AM.
-
Senior Member
registered user
@utu:
The file /etc/init.d/knoppix-startx is a file with many lines of code. But there is only one long line with startx being issued.
Code:
su -l -c "export STARTUP=$STARTUP ; exec /usr/bin/startx -- vt5 -dpi "$DPI" -br -noreset -nolisten tcp" "$USER" </dev/tty5 >/dev/tty5 2>&1 ; RC="$?"
I changed this line so that the output goes into a log file and to virtual terminal #6 instead of vt #5 since vt #5 is invisible while the Xserver is running.
Code:
su -l -c "export STARTUP=$STARTUP ; exec /usr/bin/startx -- vt5 -dpi "$DPI" -br -noreset -nolisten tcp" "$USER" </dev/tty5 2>&1 | /usr/bin/tee -a /var/log/knoppix-startx-dev-tty5.log >/dev/tty6 ; RC="$?"
I think it is always a good idea to make a backup copy of the file before altering it.
-
![Quote](images/misc/quote_icon.png)
Originally Posted by
klaus2008
@utu:
The file /etc/init.d/knoppix-startx is a file with many lines of code. But there is only one long line with startx being issued.
Code:
su -l -c "export STARTUP=$STARTUP ; exec /usr/bin/startx -- vt5 -dpi "$DPI" -br -noreset -nolisten tcp" "$USER" </dev/tty5 >/dev/tty5 2>&1 ; RC="$?"
I changed this line so that the output goes into a log file and to virtual terminal #6 instead of vt #5 since vt #5 is invisible while the Xserver is running.
Code:
su -l -c "export STARTUP=$STARTUP ; exec /usr/bin/startx -- vt5 -dpi "$DPI" -br -noreset -nolisten tcp" "$USER" </dev/tty5 2>&1 | /usr/bin/tee -a /var/log/knoppix-startx-dev-tty5.log >/dev/tty6 ; RC="$?"
I think it is always a good idea to make a backup copy of the file before altering it.
One can also make a backup of knoppix-data.XXX to be certain that whatever changes are made can be entirely overridden in case a problem develops unexpectedly. Sometimes things just start acting goofy without much in the way of clues about what is needed to fix it.
Cheers!
Krishna
-
Senior Member
registered user
@klauss2008:
Houston, we have a problem.
This line has a syntax error, according to Knoppix, cut-and-pasted from my new /etc/init.d/knoppix-startx:
su -l -c "export STARTUP=$STARTUP ; exec /usr/bin/startx -- vt5 -dpi "$DPI" -br -noreset -nolisten tcp" "$USER" </dev/tty5 2>&1 | /usr/bin/tee -a /var/log/knoppix-startx-dev-tty5.log >/dev/tty6 ; RC="$?"
This is the line you suggested, cut-and-pasted from Knoppix forum:
su -l -c "export STARTUP=$STARTUP ; exec /usr/bin/startx -- vt5 -dpi "$DPI" -br -noreset -nolisten tcp" "$USER" </dev/tty5 2>&1 | /usr/bin/tee -a /var/log/knoppix-startx-dev-tty5.log >/dev/tty6 ; RC="$?"
-
Senior Member
registered user
@Klauss2008:
The original Knoppix line ends with:
"$USER" </dev/tty5 >/dev/tty5 2>&1 ; RC="$?"
Should we now have at this point:
"$USER" </dev/tty5 >/dev/tty5 2>&1; | /usr/bin/tee...
-
Senior Member
registered user
I/O Redirection
@utu:
Code:
exec /usr/bin/startx -- vt5 -dpi "$DPI" -br -noreset -nolisten tcp </dev/tty5 >/dev/tty5 2>&1
The intention is to direct input from /dev/tty5 to the program /usr/bin/startx and redirect the output from stdout and stderr to /dev/tty5. But the output is invisible while the Xserver is running.
Code:
exec /usr/bin/startx -- vt5 -dpi "$DPI" -br -noreset -nolisten tcp </dev/tty5 2>&1 | /usr/bin/tee -a /var/log/knoppix-startx-dev-tty5.log >/dev/tty6 ; RC="$?"
The aim is to redirect /usr/bin/startx's output (stdout plus stderr) to /usr/bin/tee via a pipe. The program /usr/bin/tee appends its input to the file /var/log/knoppix-startx-dev-tty5.log or creates that file if it does not exist. In addition the tee program's output is redirected to /dev/tty6.
If you do not need the output on a terminal then you could try
Code:
su -l -c "export STARTUP=$STARTUP ; exec /usr/bin/startx -- vt5 -dpi "$DPI" -br -noreset -nolisten tcp" "$USER" </dev/tty5 >>/var/log/knoppix-startx-dev-tty5.log 2>&1 ; RC="$?"
Maybe you are interested in reading more about I/O Redirection in the Advanced Bash-Scripting Guide: http://tldp.org/LDP/abs/html/io-redirection.html
There is also a simple example of using a pipe in the BASH Programming - Introduction HOW-TO http://tldp.org/HOWTO/Bash-Prog-Intro-HOWTO-4.html
If you write a semicolon ; then the Bash thinks that you want to mark the end of a command. In the example
Code:
</dev/tty5 >/dev/tty5 2>&1; | /usr/bin/tee
is no program that delivers input to the pipe. Thus you should get an error message.
-
Senior Member
registered user
@klauss2008
I appreciate your tutelage, but I'd like to stick with your first suggestion.
As near as I can tell, I have exactly input your first proposed command.
If I have, there is a syntax error in it.
If I haven't then I can't see the difference.
Perhaps you can look more closely at my post #24, forget my post #25, and
see what needs to be done.
I think this might be the simplest way to proceed at this point.
I grasp your idea, but I'd like to defer 'understanding' the syntax to later.
So, is there a difference in the two lines I posted in #24?
Thanks for your patience.
-
Senior Member
registered user
@utu:
I do not see the difference between the two lines in your post #24. I put the old and the new knoppix-startx in a zip file so that you can compare them yourself. I do not get any syntax error messages and the log file is created as expected.
knoppix-startx.zip
-
Senior Member
registered user
![Quote](images/misc/quote_icon.png)
Originally Posted by
utu
As near as I can tell, I have exactly input your first proposed command.
If I have, there is a syntax error in it.
If I haven't then I can't see the difference.
How do you know that there is a syntax error ? Did you arrive at the conclusion based on the log file produced ? But 'tee' command appends to the log, so it could be the previous 'startx' which produced the syntax error. I suggest you remove the '-a' in the 'tee' command and test it again. This will make sure you are not seeing the history.
-
Senior Member
registered user
@kl522 & klauss2008
Doing as root...
Having revised /knoppix-startx, either with or without -a in the tee command,
when I ctl-alt-backspace, I get the syntax error, and am locked out of X for 5 min.
Reboot gives the same syntax & lock-out situation
I get back here by re-writing knoppix-startx from knoppix-startx.orig
which I saved before we began tinkering with X itself.
I get the idea, however, this is not actually the file I want per se.
This file probably duplicates only a segment of the whole on-screen experience
that originally got my curiosity.
I can probably figure out the syntax problem on my own, eventually, I just thought
it might be obvious to some of the old hands at this.
If I can't figure this problem out in a short while, I think I need to research the init process
and get to understand it better. I've always felt like a daredevil when tinkering with
the guts of the X machinery up close.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![Dell EMC 092GD6 Broadcom 9305-16i LSI Quad Port 4 Port SAS RAID Controller picture](/store/img/g/ph8AAOSwnHxmXzcB/s-l225/Dell-EMC-092GD6-Broadcom-9305-16i-LSI-Quad-Port-4-.jpg)
Dell EMC 092GD6 Broadcom 9305-16i LSI Quad Port 4 Port SAS RAID Controller
$84.99
![Sans Digital 2 Bay SATA to eSATA/ USB 2.0 RAID JBOD picture](/store/img/g/v8cAAOSwd4tmeQzp/s-l225/Sans-Digital-2-Bay-SATA-to-eSATA-USB-2-0-RAID-JBOD.jpg)
Sans Digital 2 Bay SATA to eSATA/ USB 2.0 RAID JBOD
$79.35
![OWC Guardian Maximus Raid Enclosure SATA Hard Drive FireWire picture](/store/img/g/-FoAAOSwtEBmQ5qa/s-l225/OWC-Guardian-Maximus-Raid-Enclosure-SATA-Hard-Driv.jpg)
OWC Guardian Maximus Raid Enclosure SATA Hard Drive FireWire
$36.99
![ASUS Hyper M.2 x16 Gen 4 RAID Card- Used Working picture](/store/img/g/fGwAAOSwAStmfi9c/s-l225/ASUS-Hyper-M-2-x16-Gen-4-RAID-Card-Used-Working.jpg)
ASUS Hyper M.2 x16 Gen 4 RAID Card- Used Working
$32.95
![Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 4Y5H1 High Profile picture](/store/img/g/C7YAAOSwLYJl3nQQ/s-l225/Dell-PERC-H330-PCIe-3-0-x8-RAID-Storage-Controller.jpg)
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 4Y5H1 High Profile
$17.99
![Dell H310 SATA SAS RAID Controller Card - HV52W with 1 SFF-8087 Cable, IT Mode picture](/store/img/g/9JUAAOSwlFNmcxPK/s-l225/Dell-H310-SATA-SAS-RAID-Controller-Card-HV52W-with.jpg)
Dell H310 SATA SAS RAID Controller Card - HV52W with 1 SFF-8087 Cable, IT Mode
$20.00
![LSI 8 Port 6Gbps PCIe 3.0 External SAS RAID Card w/ 1GB CacheVault & Low Profile picture](/store/img/g/3oUAAOSweflmcp0x/s-l225/LSI-8-Port-6Gbps-PCIe-3-0-External-SAS-RAID-Card-w.jpg)
LSI 8 Port 6Gbps PCIe 3.0 External SAS RAID Card w/ 1GB CacheVault & Low Profile
$24.65
![LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault picture](/store/img/g/NdcAAOSwlPtmc2X8/s-l225/LSI-MegaRAID-9361-8i-12Gbps-PCIe-3-x8-SATA-SAS-3-8.jpg)
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
![Yottamaster 5 Bay RAID Hard Drive Enclosure Type-C B For 2.5](/store/img/g/izoAAOSwfCZlZs9y/s-l225/Yottamaster-5-Bay-RAID-Hard-Drive-Enclosure-Type-C.jpg)
Yottamaster 5 Bay RAID Hard Drive Enclosure Type-C B For 2.5" 3.5" SATA HDD SSDs
$131.59
![Yottamaster 2 Bay RAID Hard Drive Enclosure USB 3.1 For 2.5](/store/img/g/7iAAAOSwl8tlJ6Cu/s-l225/Yottamaster-2-Bay-RAID-Hard-Drive-Enclosure-USB-3-.jpg)
Yottamaster 2 Bay RAID Hard Drive Enclosure USB 3.1 For 2.5" SATA HDD SSD UASP
$56.25