Results 1 to 5 of 5

Thread: Media used for Knoppix-benchmarks and which is best

  1. #1
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    198

    Media used for Knoppix-benchmarks and which is best

    I am using Super Tallent Pico C series 4 GB USB stick for Knoppix. It is very small in size and has very good reed speed. Here is the output of sudo hdparm -Tt /dev/sdb on my system:

    /dev/sdb:
    Timing cached reads: 1360 MB in 2.00 seconds = 680.29 MB/sec
    Timing buffered disk reads: 70 MB in 3.05 seconds = 22.94 MB/sec

    Here is some info regarding cached reads and buffered disk reads:

    Cached reads:
    "Perform timings of cache reads for benchmark and comparison pur‐
    poses. For meaningful results, this operation should be
    repeated 2-3 times on an otherwise inactive system (no other
    active processes) with at least a couple of megabytes of free
    memory. ###This displays the speed of reading directly from the
    Linux buffer cache without disk access. This measurement is
    essentially an indication of the throughput of the processor,
    cache, and memory of the system under test.###"

    Buffered disk reads:
    "Perform timings of device reads for benchmark and comparison
    purposes. For meaningful results, this operation should be
    repeated 2-3 times on an otherwise inactive system (no other
    active processes) with at least a couple of megabytes of free
    memory. This displays the speed of reading through the buffer
    cache to the disk without any prior caching of data. ###This mea‐
    surement is an indication of how fast the drive can sustain
    sequential data reads under Linux, without any filesystem over‐
    head.### To ensure accurate measurements, the buffer cache is
    flushed during the processing of -t using the BLKFLSBUF ioctl."

  2. #2
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    512
    I am using a poor man's install of Knoppix 6.2.1 on my hard disk. It is a WD1200BEVE built into my notebokk (hp omnibook xt1000).
    Here is the output of sudo hdparm -Tt /dev/sda on my system:
    /dev/sda:
    Timing cached reads: 118 MB in 2.03 seconds = 58.13 MB/sec
    Timing buffered disk reads: 88 MB in 3.01 seconds = 29.27 MB/sec
    I am delivering these timings for comparative purposes. I do not use a USB stick for Knoppix on that system because it supports USB 1.1 only.

  3. #3
    Senior Member registered user
    Join Date
    Dec 2009
    Posts
    423


    I am also using poor man's install on HD, here is mine :-

    /dev/sda:
    Timing cached reads: 2258 MB in 2.00 seconds = 1129.61 MB/sec
    Timing buffered disk reads: 194 MB in 3.01 seconds = 64.37 MB/sec

    I prefer not to suffer the agony of the slower devices.

  4. #4
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    For my SanDisk 2Gb SD Card,

    The output of sudo hdparm -Tt /dev/sdb is as follows:
    /dev/sdb:
    Timing cached reads: 2146 MB in 2.00 seconds = 1073.60 MB/sec
    Timing buffered disk reads: 30 MB in 3.20 seconds = 9.37 MB/sec

  5. #5
    Senior Member registered user
    Join Date
    Dec 2009
    Posts
    423
    Meaning you have a very fast computer, but your flash is very slow. Consider moving the entire '/mnt-system' to your harddisk.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 240GB SSD 2x 10GBE picture

1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 240GB SSD 2x 10GBE

$259.00



1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports picture

1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports

$149.00



Supermicro 1U Server X9SRI-F Xeon E5-2640 v2 2.5Ghz 16-Cores / 64GB / No HDD picture

Supermicro 1U Server X9SRI-F Xeon E5-2640 v2 2.5Ghz 16-Cores / 64GB / No HDD

$149.99



SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount picture

SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount

$202.49



HP ProLiant MicroServer Gen10 Plus - 16GB RAM No HDD picture

HP ProLiant MicroServer Gen10 Plus - 16GB RAM No HDD

$500.00



HPE ProLiant MicroServer Gen10 picture

HPE ProLiant MicroServer Gen10

$420.00



SuperMicro SuperServer 5018A-FTN4 505-2 Intel Atom @ 2.4GHz 8GB w/ Ears  picture

SuperMicro SuperServer 5018A-FTN4 505-2 Intel Atom @ 2.4GHz 8GB w/ Ears

$174.99



Auction Supermicro Server 3U MicroCloud - 12 Node 5039MS-H12TRF X11SSE-F  3.5Ghz picture

Auction Supermicro Server 3U MicroCloud - 12 Node 5039MS-H12TRF X11SSE-F 3.5Ghz

$2499.00



Super micro Server picture

Super micro Server

$168.00



Supermicro 2U Server 12 Caddy Bay 3.5 LFF E ATX Storage Chassis SAS2 6GBPS Rail picture

Supermicro 2U Server 12 Caddy Bay 3.5 LFF E ATX Storage Chassis SAS2 6GBPS Rail

$199.00