Results 1 to 5 of 5

Thread: graphics card driver

  1. #1
    Junior Member
    Join Date
    Jul 2010
    Posts
    22

    graphics card driver

    It has been suggest to me before, that it is best for me to install the driver for my graphics card...

    but i actually run my knoppix on multiple machines... depending on my location and such...

    so is it still recommended for me to install the drivers? (i do feel some slugishness from the graphics, just for regular web browsing and such)

    or could i just intalll all the drivers and let the system figure it out? (though I am not sure if it is capableof that...)

  2. #2
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    First, how do you know it's sluggish?
    Next, do you really know which driver you need, by its linux name, for each machine?

    In most cases for me, and luckily so, Knoppix gets it right.
    I've had problems on some other linuxes, however.
    Knoppix has built-in a lot of these drivers.

    Finally, by manufacturer's name, model, etc,
    what video hardware are you working with, machine by machine.

    Someone smarter than I can probably help you given these facts.
    Last edited by utu; 08-04-2010 at 11:49 PM.

  3. #3
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    198
    Since you use Knoppix on multiple machines, the best option would be to include the cheatcode xmodule=vesa in your /mnt-system/boot/syslinux/syslinux.cfg file - in the Label Knoppix section somewhere after the APPEND ramdisk_size=
    Vesa driver will run well on any hardware and you will also have the 24 bit color depth that you were asking for in one of your previous posts

  4. #4
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    It's always a good idea to do what mecho suggests.

    I've just done a little research that might also help.

    It would appear that Knoppix uses a one-size-fits-all xorg.conf
    and manages to tweak some of its parameters based on what it
    finds out during boot up.

    You can influence the process by means of cheat-codes which
    are dependent on what you want to control.
    Some other linuxes have tailor-made drivers to suit each piece of
    hardware. Not Knoppix.

    I also ran across on-line 'Knoppix Hacks' which you can read.
    There's a nice section on X settings around page 17 or so.

    Its url is about 160 characters, so I suggest you just start like
    I did with google, looking for 'Knoppix Hacks'.
    Last edited by utu; 08-05-2010 at 12:59 AM.

  5. #5
    Junior Member
    Join Date
    Jul 2010
    Posts
    22
    cool~~~

    Thanks for the info guys~~~ I will try that out right away

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GBASE-SR SFP+ Multi mode Module picture

SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GBASE-SR SFP+ Multi mode Module

$8.90



For Cisco SFP-10G-SR 10GBase-SR 10G SFP+ Transceiver multimode SFP 850nm 300 M picture

For Cisco SFP-10G-SR 10GBase-SR 10G SFP+ Transceiver multimode SFP 850nm 300 M

$25.99



CISCO SFP-10G-LR SFP TRANSCEIVER MODULE GBIC  10G 10GB SFP - 1 Year Warranty picture

CISCO SFP-10G-LR SFP TRANSCEIVER MODULE GBIC 10G 10GB SFP - 1 Year Warranty

$39.99



Cisco 1.25Gb 500m 850nm 1000Base-SX SFP Transceiver GLC-SX-MM picture

Cisco 1.25Gb 500m 850nm 1000Base-SX SFP Transceiver GLC-SX-MM

$2.94



Finisar FTLX8571D3BCL SFP+SR/SW 10Gb/s 850nm Multimode SFP+ Transceiver picture

Finisar FTLX8571D3BCL SFP+SR/SW 10Gb/s 850nm Multimode SFP+ Transceiver

$7.70



HP 1Gb SFP RJ-45 Module 453156-001 picture

HP 1Gb SFP RJ-45 Module 453156-001

$2.50



Genuine Cisco GLC-SX-MMD 1000Base-SX SFP Transceiver Module picture

Genuine Cisco GLC-SX-MMD 1000Base-SX SFP Transceiver Module

$7.90



10-2415-03 Genuine CISCO SFP-10G-SR 850nm 10GBASE-SR SFP+ Transceiver V03 picture

10-2415-03 Genuine CISCO SFP-10G-SR 850nm 10GBASE-SR SFP+ Transceiver V03

$8.90



SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GBASE-SR SFP+ Multi mode Module picture

SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GBASE-SR SFP+ Multi mode Module

$7.48



CISCO SFP-GE-T Copper Transceiver Module   picture

CISCO SFP-GE-T Copper Transceiver Module

$11.99