Results 1 to 3 of 3

Thread: File copy gives error message "Success"

  1. #1
    Junior Member
    Join Date
    Aug 2010
    Posts
    1

    File copy gives error message "Success"

    Hi all, Recently a motherboard in an old pc of mine toasted itself... It contained some important data, so I pulled out the HDD and put it in my good pc and booted Knoppix (the old one was running Debian, so I couldn't pull out the data with Windows *sigh*). However, when I try to copy my data to an USB HDD, I randomly keep getting the error message "Success" and then PCMan stops copying the files... It doesn't show up with every file and it doesn't even occur for the same file everytime. Quite a strange error message and I can't find any info related to it. This is no issue of having not enough space on my external HDD, because I have 971,9 GB left. That should be enough for 18GB of data, right? Could it have something to do with the fact that the HDD is (probably) NTFS formatted? Knoppix seems to be using FUSE for this, and I am totally unfamiliar with that system... Here is the line mount gives me for the external HDD:
    Code:
    /dev/sdf1 on /media/sdf1 type fuseblk (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000,allow_other,blksize=4096)
    Thanks in advance, Eric Spreen

  2. #2
    Moderator Moderator
    Join Date
    Jan 2010
    Location
    Asheville, NC, USA
    Posts
    528
    Quote Originally Posted by erispre View Post
    Hi all, Recently a motherboard in an old pc of mine toasted itself... It contained some important data, so I pulled out the HDD and put it in my good pc and booted Knoppix (the old one was running Debian, so I couldn't pull out the data with Windows *sigh*). However, when I try to copy my data to an USB HDD, I randomly keep getting the error message "Success" and then PCMan stops copying the files... It doesn't show up with every file and it doesn't even occur for the same file everytime. Quite a strange error message and I can't find any info related to it. This is no issue of having not enough space on my external HDD, because I have 971,9 GB left. That should be enough for 18GB of data, right? Could it have something to do with the fact that the HDD is (probably) NTFS formatted? Knoppix seems to be using FUSE for this, and I am totally unfamiliar with that system... Here is the line mount gives me for the external HDD:
    Code:
    /dev/sdf1 on /media/sdf1 type fuseblk (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000,allow_other,blksize=4096)
    Thanks in advance, Eric Spreen
    Two possibilities: 1) There's a problem with the old drive and/or filesystem; have you tried looking at it with GParted? It might tell you something useful. If it's NTFS, you can download a disk called "Hiten's BootCD", which will at least allow you to do a DOS chkdsk command.
    2) There's something goofy with Pcman, and it can be done with a cp command in lxterm. You can Google for more on copying at the command line.

    Hope that helps!
    Krishna

  3. #3
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    512
    @erispre

    If you like to find out more about the filesystem's type on your USB HDD then you can use the blkid command.
    Code:
    sudo blkid /dev/sdf1
    Do you use Knoppix 6.2.1? You could try GNU Midnight Commander mc instead of PCMan Filemanager.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell PowerEdge MX740C Blade Server CTO Chassis H730P picture

Dell PowerEdge MX740C Blade Server CTO Chassis H730P

$349.00



Dell PowerEdge FX2S 4 Slot Blade Chassis - CMC, 2x 2400W PSU picture

Dell PowerEdge FX2S 4 Slot Blade Chassis - CMC, 2x 2400W PSU

$299.00



Nutanix NXS2U2NL12G500 2U Server with 2x X10DRT-P-G5-NI22 Blades USED picture

Nutanix NXS2U2NL12G500 2U Server with 2x X10DRT-P-G5-NI22 Blades USED

$349.99



Cisco UCSB B200 M4 V2 Blade Server 2x E5-2660V4 14C No RAM picture

Cisco UCSB B200 M4 V2 Blade Server 2x E5-2660V4 14C No RAM

$79.99



Dell PowerEdge M620  Blade Server 2 x Xeon e5 2665 8 x 16 GB(128) RAM - No HD picture

Dell PowerEdge M620 Blade Server 2 x Xeon e5 2665 8 x 16 GB(128) RAM - No HD

$44.99



Dell PowerEdge M620 CTO Blade Server (for M1000e or VRTX) 32GB(4x8GB RAM) No HDD picture

Dell PowerEdge M620 CTO Blade Server (for M1000e or VRTX) 32GB(4x8GB RAM) No HDD

$72.16



Dell Poweredge FC630 Blade Server CTO Chassis 2x Xeon E5-2699 v4 2.2GHz, H730 picture

Dell Poweredge FC630 Blade Server CTO Chassis 2x Xeon E5-2699 v4 2.2GHz, H730

$378.00



Dell PowerEdge M520 CTO Blade Server 2xIntel Xeon E5-2430, No RAM No HDD picture

Dell PowerEdge M520 CTO Blade Server 2xIntel Xeon E5-2430, No RAM No HDD

$40.00



Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W picture

Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W

$399.00



Dell PowerEdge FC830 8-SFF 4*Xeon E5-4669v3 2.1GHz No HDD/RAM Blade Server Node picture

Dell PowerEdge FC830 8-SFF 4*Xeon E5-4669v3 2.1GHz No HDD/RAM Blade Server Node

$179.99