Results 1 to 3 of 3

Thread: File copy gives error message "Success"

  1. #1
    Junior Member
    Join Date
    Aug 2010
    Posts
    1

    File copy gives error message "Success"

    Hi all, Recently a motherboard in an old pc of mine toasted itself... It contained some important data, so I pulled out the HDD and put it in my good pc and booted Knoppix (the old one was running Debian, so I couldn't pull out the data with Windows *sigh*). However, when I try to copy my data to an USB HDD, I randomly keep getting the error message "Success" and then PCMan stops copying the files... It doesn't show up with every file and it doesn't even occur for the same file everytime. Quite a strange error message and I can't find any info related to it. This is no issue of having not enough space on my external HDD, because I have 971,9 GB left. That should be enough for 18GB of data, right? Could it have something to do with the fact that the HDD is (probably) NTFS formatted? Knoppix seems to be using FUSE for this, and I am totally unfamiliar with that system... Here is the line mount gives me for the external HDD:
    Code:
    /dev/sdf1 on /media/sdf1 type fuseblk (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000,allow_other,blksize=4096)
    Thanks in advance, Eric Spreen

  2. #2
    Moderator Moderator
    Join Date
    Jan 2010
    Location
    Asheville, NC, USA
    Posts
    528
    Quote Originally Posted by erispre View Post
    Hi all, Recently a motherboard in an old pc of mine toasted itself... It contained some important data, so I pulled out the HDD and put it in my good pc and booted Knoppix (the old one was running Debian, so I couldn't pull out the data with Windows *sigh*). However, when I try to copy my data to an USB HDD, I randomly keep getting the error message "Success" and then PCMan stops copying the files... It doesn't show up with every file and it doesn't even occur for the same file everytime. Quite a strange error message and I can't find any info related to it. This is no issue of having not enough space on my external HDD, because I have 971,9 GB left. That should be enough for 18GB of data, right? Could it have something to do with the fact that the HDD is (probably) NTFS formatted? Knoppix seems to be using FUSE for this, and I am totally unfamiliar with that system... Here is the line mount gives me for the external HDD:
    Code:
    /dev/sdf1 on /media/sdf1 type fuseblk (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000,allow_other,blksize=4096)
    Thanks in advance, Eric Spreen
    Two possibilities: 1) There's a problem with the old drive and/or filesystem; have you tried looking at it with GParted? It might tell you something useful. If it's NTFS, you can download a disk called "Hiten's BootCD", which will at least allow you to do a DOS chkdsk command.
    2) There's something goofy with Pcman, and it can be done with a cp command in lxterm. You can Google for more on copying at the command line.

    Hope that helps!
    Krishna

  3. #3
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    512
    @erispre

    If you like to find out more about the filesystem's type on your USB HDD then you can use the blkid command.
    Code:
    sudo blkid /dev/sdf1
    Do you use Knoppix 6.2.1? You could try GNU Midnight Commander mc instead of PCMan Filemanager.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell PowerEdge 1950 Server 2.33GHz Intel Xeon E5345 16GB DDR2-RAM (NO HDD) picture

Dell PowerEdge 1950 Server 2.33GHz Intel Xeon E5345 16GB DDR2-RAM (NO HDD)

$86.38



Dell M600 PowerEdge Blade Server 2X Xeon E5430 picture

Dell M600 PowerEdge Blade Server 2X Xeon E5430

$29.99



HP BladeSystem C7000 Server Blade Chassis | 0 Blades picture

HP BladeSystem C7000 Server Blade Chassis | 0 Blades

$54.00



Dell Poweredge M600 Blade Server - Parts Only picture

Dell Poweredge M600 Blade Server - Parts Only

$45.00



Dell PowerEdge M620 Blade Server 2x Xeon E5-2695v2 2.4ghz 24-Cores H710 IdracEnt picture

Dell PowerEdge M620 Blade Server 2x Xeon E5-2695v2 2.4ghz 24-Cores H710 IdracEnt

$159.99



Poweredge M905 Blade Server 4X Opteron 8356 64GB RAM picture

Poweredge M905 Blade Server 4X Opteron 8356 64GB RAM

$199.99



Dell PowerEdge FX2s Chassis Server with 1x FC430 & 1x FD332 Blades picture

Dell PowerEdge FX2s Chassis Server with 1x FC430 & 1x FD332 Blades

$1417.99



Dell PowerEdge M610 Server Blade 2xQuad-Core Xeon 2.40GHz + 192GB RAM picture

Dell PowerEdge M610 Server Blade 2xQuad-Core Xeon 2.40GHz + 192GB RAM

$200.00



HP BL460c G8 Blade 12-Core Server 2x E5-2620 2.0GHz 256GB-16 picture

HP BL460c G8 Blade 12-Core Server 2x E5-2620 2.0GHz 256GB-16

$950.29



HP BL460c G8 Blade 16-Core Server 2x E5-2640 v2 2.0GHz 32GB-16 2x 1.2TB SAS picture

HP BL460c G8 Blade 16-Core Server 2x E5-2640 v2 2.0GHz 32GB-16 2x 1.2TB SAS

$621.68