Results 1 to 3 of 3

Thread: File copy gives error message "Success"

  1. #1
    Junior Member
    Join Date
    Aug 2010
    Posts
    1

    File copy gives error message "Success"

    Hi all, Recently a motherboard in an old pc of mine toasted itself... It contained some important data, so I pulled out the HDD and put it in my good pc and booted Knoppix (the old one was running Debian, so I couldn't pull out the data with Windows *sigh*). However, when I try to copy my data to an USB HDD, I randomly keep getting the error message "Success" and then PCMan stops copying the files... It doesn't show up with every file and it doesn't even occur for the same file everytime. Quite a strange error message and I can't find any info related to it. This is no issue of having not enough space on my external HDD, because I have 971,9 GB left. That should be enough for 18GB of data, right? Could it have something to do with the fact that the HDD is (probably) NTFS formatted? Knoppix seems to be using FUSE for this, and I am totally unfamiliar with that system... Here is the line mount gives me for the external HDD:
    Code:
    /dev/sdf1 on /media/sdf1 type fuseblk (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000,allow_other,blksize=4096)
    Thanks in advance, Eric Spreen

  2. #2
    Moderator Moderator
    Join Date
    Jan 2010
    Location
    Asheville, NC, USA
    Posts
    528
    Quote Originally Posted by erispre View Post
    Hi all, Recently a motherboard in an old pc of mine toasted itself... It contained some important data, so I pulled out the HDD and put it in my good pc and booted Knoppix (the old one was running Debian, so I couldn't pull out the data with Windows *sigh*). However, when I try to copy my data to an USB HDD, I randomly keep getting the error message "Success" and then PCMan stops copying the files... It doesn't show up with every file and it doesn't even occur for the same file everytime. Quite a strange error message and I can't find any info related to it. This is no issue of having not enough space on my external HDD, because I have 971,9 GB left. That should be enough for 18GB of data, right? Could it have something to do with the fact that the HDD is (probably) NTFS formatted? Knoppix seems to be using FUSE for this, and I am totally unfamiliar with that system... Here is the line mount gives me for the external HDD:
    Code:
    /dev/sdf1 on /media/sdf1 type fuseblk (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000,allow_other,blksize=4096)
    Thanks in advance, Eric Spreen
    Two possibilities: 1) There's a problem with the old drive and/or filesystem; have you tried looking at it with GParted? It might tell you something useful. If it's NTFS, you can download a disk called "Hiten's BootCD", which will at least allow you to do a DOS chkdsk command.
    2) There's something goofy with Pcman, and it can be done with a cp command in lxterm. You can Google for more on copying at the command line.

    Hope that helps!
    Krishna

  3. #3
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    512
    @erispre

    If you like to find out more about the filesystem's type on your USB HDD then you can use the blkid command.
    Code:
    sudo blkid /dev/sdf1
    Do you use Knoppix 6.2.1? You could try GNU Midnight Commander mc instead of PCMan Filemanager.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell Poweredge Blade Server FC630 CTO Chassis With iDRAC 8 Enterprise, No CPU picture

Dell Poweredge Blade Server FC630 CTO Chassis With iDRAC 8 Enterprise, No CPU

$199.95



Cisco UCSB-5108-AC2 Blade Server Chassis 8-Bays  picture

Cisco UCSB-5108-AC2 Blade Server Chassis 8-Bays

$149.95



Dell PowerEdge M620 Blade Server 2x E5-2680 2.7Ghz 16-Cores 64GB  2x 146GB  H710 picture

Dell PowerEdge M620 Blade Server 2x E5-2680 2.7Ghz 16-Cores 64GB 2x 146GB H710

$129.99



HP ProLiant BL465c G7 Server Blade 64GB RAM  picture

HP ProLiant BL465c G7 Server Blade 64GB RAM

$80.00



Dell PowerEdge Blade Server FC630 + Network Card No CPUs No RAM No HDDs picture

Dell PowerEdge Blade Server FC630 + Network Card No CPUs No RAM No HDDs

$170.00



Dell PowerEdge 1950 Server 2.33GHz Intel Xeon E5345 16GB DDR2-RAM (NO HDD) picture

Dell PowerEdge 1950 Server 2.33GHz Intel Xeon E5345 16GB DDR2-RAM (NO HDD)

$86.38



DELL POWEREDGE M630 BAREBONES BLADE SERVER 2x HEATSINK SATA ONLY picture

DELL POWEREDGE M630 BAREBONES BLADE SERVER 2x HEATSINK SATA ONLY

$96.00



HP ProLiant BL460c GEN8 2x HEATSINK Configure-to-order CTO Blade Server picture

HP ProLiant BL460c GEN8 2x HEATSINK Configure-to-order CTO Blade Server

$54.00



Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 8x B200 M4 16x E5-2620v3 picture

Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 8x B200 M4 16x E5-2620v3

$749.99



GENUINE CISCO UCS-B200-M3 (UCS-B200-M3-V04) Blade Server Intel Xeon Inside  picture

GENUINE CISCO UCS-B200-M3 (UCS-B200-M3-V04) Blade Server Intel Xeon Inside 

$784.99