Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 26

Thread: Help me train a mouse

  1. #11
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    198
    You can try and see if some xinput commands may work. Check if
    xinput list-props "Microsoft® Nano Transceiver v1.0"
    shows up your device and its available options. If it does you might be in luck

  2. #12
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    198
    Because I am not sure about the name by which your mouse is listed can you post the output of :

    cat /proc/bus/input/devices

  3. #13
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    @mecho

    You have already solved my immediate problem with the unplugging.
    M$-Nano is behaving now. I don't need to change any settings right now.

    It looks like we have to guess at some combination to get the
    interface specified. That's too much work.

    I though by posting dmesg that perhaps a fellow MS-Nano owner may
    happen along and give us the magic combination.

    You should stop work on this.
    Once again you've bailed me out. Thanks.
    Will post what you requested subsequently.

    Ciao, as they say in Roma.

  4. #14
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    @mecho

    I tried to cut and paste your copyright, but it didn't work

    knoppix@Microknoppix:~$ xinput list-props "Microsoft(R) Nano Transceiver v1.0"
    unable to find device Microsoft(R) Nano Transceiver v1.0

    device.txt too long to post, am attempting to create an enclosure.

    Now stop working on this.
    Attached Files Attached Files

  5. #15
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    198
    Yes, I was right the name is listed as Microsoft Microsoft® Nano Transceiver v1.0 by the kernel - there is one more thing I will ask you to send me-it is the output of:
    xinput list-props "Microsoft Microsoft® Nano Transceiver v1.0"
    It has 2 times Microsoft Microsoft not 1 as I was guessing
    And - I can see that you are OK with it. I will not bother anymore
    Last edited by mecho; 08-05-2010 at 12:22 AM.

  6. #16
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    How do I enter the 'Registered trademark' symbol?
    I cut and pasted your text and it came out just (R).
    The trademark symbol is probably important.

    You are never a bother.

  7. #17
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    198
    Try to change the font you use in lxterminal

  8. #18
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    198
    And you don't have to list the device by its name - it can be listed by it's ID. You do it like this
    xinput list
    It will output all devices with their ID number. The output of cat /proc/bus/input/devices shows me that your mouse is id=10, but you just make sure, then:
    xinput list-props 10
    don't type id= just the number, and it should list all evdev options for the device.Post that output here

  9. #19
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    @mecho

    I don't think you want id=10, that's webcam; see xinputlist.txt.
    Id's 11, 12 and 13 may be what you want; see props11thru13.txt
    Attached Files Attached Files

  10. #20
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    198
    From what I see, you have 2 identical devices id=12 and 13. One of them has more complete evdev prop-list. I assume the second one was created after you unpluged the wireless adapter and is the one in use. I was thinking to create a script with xinput commands to restore the good working values, but it can not work if the prop is not there. Another way is to tell the kernel to rescan all usb devices after you log in in X, but I am not sure how to do that. I give up

Page 2 of 3 FirstFirst 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


ZipLink ZL-2CBL2-2P picture

ZipLink ZL-2CBL2-2P

$19.50



Intel - Core i7-12700K Desktop Processor 12 (8P+4E) Cores up to 5.0 GHz Unloc... picture

Intel - Core i7-12700K Desktop Processor 12 (8P+4E) Cores up to 5.0 GHz Unloc...

$242.99



Intel - Core i9-14900K 14th Gen 24-Core 32-Thread - 4.4GHz (6.0GHz Turbo) Soc... picture

Intel - Core i9-14900K 14th Gen 24-Core 32-Thread - 4.4GHz (6.0GHz Turbo) Soc...

$539.99



Intel 6 Core i5-8600 3.1GHZ Desktop Processor SR3X0 picture

Intel 6 Core i5-8600 3.1GHZ Desktop Processor SR3X0

$50.00



Intel - Core i7-14700K 14th Gen 20-Core 28-Thread - 4.3GHz (5.6GHz Turbo) Soc... picture

Intel - Core i7-14700K 14th Gen 20-Core 28-Thread - 4.3GHz (5.6GHz Turbo) Soc...

$399.99



INTEL XEON GOLD 6148 20 Core SR3B6 2.4GHZ 27.5MB Processor    @24 picture

INTEL XEON GOLD 6148 20 Core SR3B6 2.4GHZ 27.5MB Processor @24

$99.99



Intel SR2L6 Core i5-6500 3.2GHz 6th Gen LGA1151 Socket Quad-Core Processor picture

Intel SR2L6 Core i5-6500 3.2GHz 6th Gen LGA1151 Socket Quad-Core Processor

$24.59



Intel Xeon E5-2690V2 3.00GHz 10-Core (SR1A5) Processor CPU READ DESCRIPTION picture

Intel Xeon E5-2690V2 3.00GHz 10-Core (SR1A5) Processor CPU READ DESCRIPTION

$12.00



AMD Ryzen 7 2700X CPU Processor 3.7GHz AM4 picture

AMD Ryzen 7 2700X CPU Processor 3.7GHz AM4

$74.99



Intel Core i9-13900K Raptor Lake 24-Core (8P+16E) Desktop Processor CPU picture

Intel Core i9-13900K Raptor Lake 24-Core (8P+16E) Desktop Processor CPU

$499.00