Hello,
I have another question to ask. I booted Knoppix 6.2 with the following boot parameters :
knoppix 2 toram lang=it
this is the situation of my disk (formatted with the NTFS filesystem) :
(hd0,0) ---> this is the invisible partition built by Windows 7
(hd0,1) ---> here there is the installation of Windows 7
I copied all the Windows 7 installation files on (hd0,1)\7\
Now,from the running Knoppix,I would like to configure grub4dos so that,when I restart the computer,the installation of Windows 7 can start.
I've added the following section to : /boot/isolinux/isolinux.cfg:
DEFAULT Windows
LABEL Windows
KERNEL grub.exe
and I copied grub.exe in /boot/isolinux/ and in /boot/grub/
I know that GRUB4DOS requires menu.lst,so I have copied this menu.lst file on
/boot/isolinux/ and on /boot/grub/
title Start the installation of Windows 7
root (hd0,1)
chainloader (hd0,1)/7/bootmgr
but when Knoppix restart and I choose Windows at the boot prompt,the installation of
Windows 7 does not start. Can you tell me where is the error ? Thanks in advance.
XDHXT DELL PERC H710P 6Gbps 1GB PCI RAID CONTROLLER 0XDHXT
$59.00
IBM LSI SAS9220-8i M1015 46M0861 SAS/SATA PCI-e RAID Controller Both brackets
$139.00
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
HPE 869102-001 Smart Array E208i-a SR Gen10 Storage Controller RAID SP: 871039
$129.99
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$86.99
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$35.96
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
Yottamaster 5 Bay RAID Hard Drive Enclosure USB3.1 Type C 2.5"/3.5" SATA HDD SSD
$142.49
Dell PCIe M.2 Boss S1 RAID Controller Card 7HYY4 with 2x 240GB SSD
$94.99