Hello,
I have another question to ask. I booted Knoppix 6.2 with the following boot parameters :
knoppix 2 toram lang=it
this is the situation of my disk (formatted with the NTFS filesystem) :
(hd0,0) ---> this is the invisible partition built by Windows 7
(hd0,1) ---> here there is the installation of Windows 7
I copied all the Windows 7 installation files on (hd0,1)\7\
Now,from the running Knoppix,I would like to configure grub4dos so that,when I restart the computer,the installation of Windows 7 can start.
I've added the following section to : /boot/isolinux/isolinux.cfg:
DEFAULT Windows
LABEL Windows
KERNEL grub.exe
and I copied grub.exe in /boot/isolinux/ and in /boot/grub/
I know that GRUB4DOS requires menu.lst,so I have copied this menu.lst file on
/boot/isolinux/ and on /boot/grub/
title Start the installation of Windows 7
root (hd0,1)
chainloader (hd0,1)/7/bootmgr
but when Knoppix restart and I choose Windows at the boot prompt,the installation of
Windows 7 does not start. Can you tell me where is the error ? Thanks in advance.
WD 2TB Certified Refurbished Elements, External Hard Drive - RWDBU6Y0020BBK-WESN
$49.99
Seagate Exos X16 ST14000NM001G 14TB 512E SATA 6Gb/s 3.5" Enterprise Hard Drive
$169.99
Western Digital 4TB WD Purple Surveillance HDD, Internal Hard Drive - WD43PURZ
$96.99
Seagate Exos X22 ST20000NM004E 20TB 512E SATA 6Gb/s 3.5" Enterprise Hard Drive
$268.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$89.99
Seagate Exos 7E10 ST2000NM000B 2TB 7200RPM SATA 6.0Gb/s 3.5" Internal Hard Drive
$29.99
HGST Ultrastar HE10 HUH721010ALE600 10TB SATA 6Gb/s 7200RPM 3.5" Enterprise HDD
$69.99
2TB 3.5" HDD Sata Mixed Brands hard drive Tested Formatted
$18.99
WD 16TB Elements Desktop, Certified Refurbished Hard Drive - RWDBWLG0160HBK-NESN
$209.99
8TB Seagate Archive SATA 3.5" HDD Hard Drive 100% Healthy 200MB/s ST8000AS0002
$36.34