Hello,
I have another question to ask. I booted Knoppix 6.2 with the following boot parameters :
knoppix 2 toram lang=it
this is the situation of my disk (formatted with the NTFS filesystem) :
(hd0,0) ---> this is the invisible partition built by Windows 7
(hd0,1) ---> here there is the installation of Windows 7
I copied all the Windows 7 installation files on (hd0,1)\7\
Now,from the running Knoppix,I would like to configure grub4dos so that,when I restart the computer,the installation of Windows 7 can start.
I've added the following section to : /boot/isolinux/isolinux.cfg:
DEFAULT Windows
LABEL Windows
KERNEL grub.exe
and I copied grub.exe in /boot/isolinux/ and in /boot/grub/
I know that GRUB4DOS requires menu.lst,so I have copied this menu.lst file on
/boot/isolinux/ and on /boot/grub/
title Start the installation of Windows 7
root (hd0,1)
chainloader (hd0,1)/7/bootmgr
but when Knoppix restart and I choose Windows at the boot prompt,the installation of
Windows 7 does not start. Can you tell me where is the error ? Thanks in advance.
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$274.00
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$79.19
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell Emc R750 Computer Poweredge edge racked server.
$750.00
Dell PowerEdge R730, 2 sinks, SystemBoard, 8 trays,H330,Idrac 8 exp, 2x750w Psu
$135.00
Dell PowerEdge R730 Server 2x E5-2670v3 2.30Ghz 24-Core 128GB H730
$411.75
Dell PowerEdge R720 Server | 2x E5-2660 2.2GHz | 128GB Ram | 1.2TB HDD | H710P
$179.00
DELL PowerEdge R630 8SFF Server 2x E5-2680v3 2.5GHz =24 Cores 128GB H730 4xRJ45
$360.00