Hello,
I have another question to ask. I booted Knoppix 6.2 with the following boot parameters :
knoppix 2 toram lang=it
this is the situation of my disk (formatted with the NTFS filesystem) :
(hd0,0) ---> this is the invisible partition built by Windows 7
(hd0,1) ---> here there is the installation of Windows 7
I copied all the Windows 7 installation files on (hd0,1)\7\
Now,from the running Knoppix,I would like to configure grub4dos so that,when I restart the computer,the installation of Windows 7 can start.
I've added the following section to : /boot/isolinux/isolinux.cfg:
DEFAULT Windows
LABEL Windows
KERNEL grub.exe
and I copied grub.exe in /boot/isolinux/ and in /boot/grub/
I know that GRUB4DOS requires menu.lst,so I have copied this menu.lst file on
/boot/isolinux/ and on /boot/grub/
title Start the installation of Windows 7
root (hd0,1)
chainloader (hd0,1)/7/bootmgr
but when Knoppix restart and I choose Windows at the boot prompt,the installation of
Windows 7 does not start. Can you tell me where is the error ? Thanks in advance.
DELL PowerEdge R730XD 24x 2.5" Server Dual 750W Dual Heatsink - BareBones TESTED
$269.99
Supermicro 4U 36 Bay Storage Server 2.2Ghz 16-C 128GB 1x1280W Rails TrueNAS ZFS
$725.06
HP ProLiant DL360 G9 Server | 2 x E5-2660V3 2.6Ghz | 64GB | 2 x 900GB SAS HDD
$339.00
H261-Z61 2U 24SFF AMD Server 8x EPYC 7551 256-Cores 256GB RAM 8x25G NIC 2x2200W
$2612.18
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$274.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD
$196.95
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
HP ProLiant DL380 Gen9 16SFF 2x E5-2680v4 2.4GHz =28 Cores 64GB P840 4xRJ45
$353.00
Dell Poweredge R730xd 2.5in 2x E5-2690 v3 2.6ghz 24-Cores 64gb H730 2x 750w
$189.99