Hi - newbie here -
I have been 'playing around' with various versions of Linux ( Knoppix/Suse/Ubuntu and Windows on a 160Gb hard drive for a while and I wanted to revert it back to just a blank 160Gb hdd.
Using Knoppix live 5.1.1, I opened up a terminal and went into sudo gparted & to see what was showing and the following showed up -
/dev/cloop0 (5.76GiB)
/dev/cloop1 (0B)
/dev/cloop2 (4.60GiB)
/dev/cloop3 (0B)
/dev/cloop4 (0B)
/dev/cloop5 (0B)
/dev/cloop6 (0B)
/dev/cloop7 (0B)
/dev/hda (149.05GiB)
my question is - are cloop0 and cloop2 actually on the hdd or are they images that the live dvd is showing so that when I access a Knoppix programme - this provides a quick reference to access it.
I have also used a windows bootable floppy disc dos programme called 'debug' which helps to revert a hdd back to an 'unused' state but this also only shows 149.05Gb.
Have I lost 10Gb somewhere??
many thanks for help in advance.
Juniper MX104-AC 4 MIC Slot Chassis w/ 2x RE-S-MX104 and 2x PWR-MX104-AC
$1899.00
*New* MIC-MRATE Juniper 12-Port Multi-Rate MIC module
$749.00
Juniper Networks EX2300-24P 24 Port Gigabit PoE 4 SFP 1/10G Network Switch
$119.00
Juniper EX3400-48P 48-Ports PoE+ 4x SFP+ and 2x QSFP+ Managed Switch Tested
$215.00
Juniper EX3300-48P, 48 Port PoE+ Gigabit Network Switch w/ Power cord
$54.99
Juniper 48-Port GbE PoE+ & 4-Port 10GB SFP+ Network Switch EX3300-48P w/ License
$49.99
Juniper EX4600-40F-AFO 24x SFP+/SFP & 4x QSFP+ Ports Switch 2XPSU TESTED
$700.95
Juniper Networks EX3400-48P 48x Gigabit PoE+ RJ45 2x 40Gb/s QSFP+ Switch 2x PSU
$364.99
Juniper QFX5100-48S 48-Port 10GbE SFP+ 6x40GbE QSFP Network Switch w/Ears Tested
$599.99
Juniper EX3300-48P, 48 Port PoE+ Gigabit Network Switch
$50.00