Results 1 to 6 of 6

Thread: Knoppix and Debian squeeze

Hybrid View

  1. #1
    Member
    Join Date
    Jul 2010
    Location
    Northwest U.S.
    Posts
    30

    Knoppix and Debian squeeze

    Hi,

    Does anything particular happen in the Knoppix release cycle when Debian squeeze goes to stable (hopefully this year ) or is the Debian testing/stable cycle unrelated?

    Just curious.

    The custom kernel, the Knoppix specific packages, and the Knoppix-centric boot process seem to make a minefield of upgrading to a full flotilla of squeeze packages.

  2. #2
    Moderator Moderator
    Join Date
    Jan 2010
    Location
    Asheville, NC, USA
    Posts
    528
    There was a post not too long ago, where someone reported that they'd done a lot of upgrades, some even beyond what you describe, and they didn't seem to think it was overly problematic. You can easily upgrade whatever you like with Synaptic, though you'll want to add some Squeeze repositories, I'm sure - just be ready to try again if something isn't compatible. If you look in the appropriate forum, I'm sure you'll find the upgrade related discussion.

    Cheers!
    Krishna

  3. #3
    Member
    Join Date
    Jul 2010
    Location
    Northwest U.S.
    Posts
    30
    The nice thing about the thumb drive install: it is already compressed for easy backup to hard disk before booting for an upgrade session.

    However, my hard drive install is what I am thinking of heavily upgrading. The drive already has Grub installed for dual booting into Windows. I did something kind of cool. I followed the instructions to install Clonezilla on my hard drive. It worked first time!

    Now I have a Clonezilla item on my Grub menu. It makes an iso image of the Knoppix partition in 4 minutes including boot time. Then I reboot into Knoppix for upgrades.

    Slow progress. I'll look for that post.

  4. #4
    Member
    Join Date
    Jul 2010
    Location
    Northwest U.S.
    Posts
    30
    As Homer Simpson would say, DOH!

    I forgot to change /etc/apt/apt.conf.d/00knoppix from
    Code:
    APT::Default-Release "stable";
    to "testing" .

    So, during upgrades, dependency resolutions of not-installed stable packages got a preference of 990, while not-installed testing/experimental packages got a preference of 500 and installed testing/experimental packages, 100.

    That sure will put a damper on upgrades.

  5. #5
    Senior Member registered user
    Join Date
    Dec 2009
    Posts
    423
    I am certainly not the debian package management expert, but it seems synaptic stores its own settings and configurations, and some of the settings may not be consistent with 'apt' or 'dpkg'.

    For example, if I bring up synaptic GUI, click settings->preferences->distribution and check 'prefer version from "testing", the configuration changes is then stored in /root/.synaptic/synaptic.conf.

    If one execute command lines to upgrade and install packages, it will be unlikely that the above synaptic configuration will be consulted.

  6. #6
    Member
    Join Date
    Jul 2010
    Location
    Northwest U.S.
    Posts
    30
    Ahh, I see this is true.

    I don't know much about Synaptic. Mostly use aptitude. But I have been using Synaptic more because Knoppix features it.

    That file would explain why Synaptic has offered much different dependency resolutions.

    Thanks. That should make things far less confusing!
    Last edited by evenso; 09-17-2010 at 03:25 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Juniper MX104-AC 4 MIC Slot Chassis w/ 2x RE-S-MX104 and 2x PWR-MX104-AC picture

Juniper MX104-AC 4 MIC Slot Chassis w/ 2x RE-S-MX104 and 2x PWR-MX104-AC

$1899.00



*New* MIC-MRATE Juniper 12-Port Multi-Rate MIC module picture

*New* MIC-MRATE Juniper 12-Port Multi-Rate MIC module

$749.00



Juniper Networks EX2300-24P 24 Port Gigabit PoE 4 SFP 1/10G Network Switch picture

Juniper Networks EX2300-24P 24 Port Gigabit PoE 4 SFP 1/10G Network Switch

$119.00



Juniper EX3300-48P, 48 Port PoE+ Gigabit Network Switch w/ Power cord picture

Juniper EX3300-48P, 48 Port PoE+ Gigabit Network Switch w/ Power cord

$54.99



Juniper EX4300-48T 48 Port 1G 4 QSFP 40G Dual PSU AFO w/ Rails, EX-UM-4X4SFP Mod picture

Juniper EX4300-48T 48 Port 1G 4 QSFP 40G Dual PSU AFO w/ Rails, EX-UM-4X4SFP Mod

$169.00



Juniper ACX5448-AC-AFO 48 SFP+/SFP PORTS 4 QSFP28PORTS ACX5448 picture

Juniper ACX5448-AC-AFO 48 SFP+/SFP PORTS 4 QSFP28PORTS ACX5448

$13500.00



JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER picture

JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER

$315.00



Juniper Networks EX3300-48P 48-Port PoE+ 4x SFP+ Network Switch picture

Juniper Networks EX3300-48P 48-Port PoE+ 4x SFP+ Network Switch

$50.95



Juniper QFX5100-48S 48-Port 10GbE SFP+ 6x40GbE QSFP Network Switch w/Ears Tested picture

Juniper QFX5100-48S 48-Port 10GbE SFP+ 6x40GbE QSFP Network Switch w/Ears Tested

$599.99



Juniper Networks EX4550-32F-AFO 32x 1/10GbE SFP+ Network Switch w/ Power Cords picture

Juniper Networks EX4550-32F-AFO 32x 1/10GbE SFP+ Network Switch w/ Power Cords

$299.00