-
How do I enable touchpad-tapping?
Hello everyone. I am new in this forum. Knoppix is a great Linux distro. I write a software for an old computer, without mouse and keyboard - only with touchscreen (i think - it use the same drivers like touchpad, so I'm testing my application on laptop). But touchpad-tapping (i want to it mean click) i disabled. I have downloaded synaptics drivers from repositories, but it still not works. What I must do to enable it? Change something in /etc/X11/xorg.conf ? Thank you in advance, rr
-
Senior Member
registered user
[there is a emoticon on top which I can't remove]
There are two ways to go about this, as you have noted, one is to modify /etc/X11/xorg.conf. Because knoppix xorg.conf is script generated, you will have understand the needed syntax and as well as understand which script is the one generating it.
Alternatively, this is what I would do it. Firstly make sure you have this program 'synclient', check that it exists :-
( this will list all the available settings ).
If it does not exist, you would have to install xserver-xorg-input-synaptic.
After that go to /etc/X11/Xsession.d and add a file say '15x11-synaptics' with this content :-
Code:
#
synclient "TapButton1=1"
That's all which is needed. After you restarted Xserver, tap-to-click will be working.
Last edited by kl522; 09-27-2010 at 10:59 PM.
-
Senior Member
registered user
@kl522
Thank you for providing this valuable information.
I use the command
Code:
synclient TapButton1=1 TapButton2=3 TapButton3=2
to enable tapping with two and three fingers. Tapping with two fingers is set to button 3 because clicking with the right button is more often than clicking with the middle button.
-
thanks, it works
-
Senior Member
registered user
You are fully justified to use tap-to-click on a system without keyboard and mouse.
I use touchpad on a typical notebook, personally I consider tap-to-click a nuisance.
However I do this :-
synclient "HorizEdgeScroll=1"
to allow me to use horizontal scroll on the edge of the touchpad.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
SUN Blade X6250 Server 8GB RAM DUAL PROCESSORS 594-4531-01
$109.99
CISCO 5108 Blade Server Chassis N20-C6508
$200.00
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
HP ProLiant BL460c Server Blade (2 x CPU) 24GB RAM/No Drives
$45.60
Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG
$69.99
Dell PowerEdge C6400 Blade Server Chassis w/ 2x 2400W PSUs - Preproduction Model
$349.00
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99