-
How do I enable touchpad-tapping?
Hello everyone. I am new in this forum. Knoppix is a great Linux distro. I write a software for an old computer, without mouse and keyboard - only with touchscreen (i think - it use the same drivers like touchpad, so I'm testing my application on laptop). But touchpad-tapping (i want to it mean click) i disabled. I have downloaded synaptics drivers from repositories, but it still not works. What I must do to enable it? Change something in /etc/X11/xorg.conf ? Thank you in advance, rr
-
Senior Member
registered user
[there is a emoticon on top which I can't remove]
There are two ways to go about this, as you have noted, one is to modify /etc/X11/xorg.conf. Because knoppix xorg.conf is script generated, you will have understand the needed syntax and as well as understand which script is the one generating it.
Alternatively, this is what I would do it. Firstly make sure you have this program 'synclient', check that it exists :-
( this will list all the available settings ).
If it does not exist, you would have to install xserver-xorg-input-synaptic.
After that go to /etc/X11/Xsession.d and add a file say '15x11-synaptics' with this content :-
Code:
#
synclient "TapButton1=1"
That's all which is needed. After you restarted Xserver, tap-to-click will be working.
Last edited by kl522; 09-27-2010 at 10:59 PM.
-
Senior Member
registered user
@kl522
Thank you for providing this valuable information.
I use the command
Code:
synclient TapButton1=1 TapButton2=3 TapButton3=2
to enable tapping with two and three fingers. Tapping with two fingers is set to button 3 because clicking with the right button is more often than clicking with the middle button.
-
thanks, it works
-
Senior Member
registered user
You are fully justified to use tap-to-click on a system without keyboard and mouse.
I use touchpad on a typical notebook, personally I consider tap-to-click a nuisance.
However I do this :-
synclient "HorizEdgeScroll=1"
to allow me to use horizontal scroll on the edge of the touchpad.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
H261-Z61 2U 24SFF AMD Server 8x EPYC 7551 256-Cores 256GB RAM 8x25G NIC 2x2200W
$2612.18
Dell Poweredge R640 Server | 2x Xeon Gold 6132 | 128GB | H730P | 8x HDD Trays
$1849.00
Dell Poweredge R640 Server | 2x Xeon Gold 6132 | 512GB | H730P | 8x HDD Trays
$2549.00
HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD
$196.95
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$274.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
HP ProLiant DL380 Gen9 16SFF 2x E5-2680v4 2.4GHz =28 Cores 64GB P840 4xRJ45
$353.00