Results 1 to 5 of 5

Thread: How do I enable touchpad-tapping?

  1. #1
    Junior Member
    Join Date
    Sep 2010
    Posts
    8

    How do I enable touchpad-tapping?

    Hello everyone. I am new in this forum. Knoppix is a great Linux distro. I write a software for an old computer, without mouse and keyboard - only with touchscreen (i think - it use the same drivers like touchpad, so I'm testing my application on laptop). But touchpad-tapping (i want to it mean click) i disabled. I have downloaded synaptics drivers from repositories, but it still not works. What I must do to enable it? Change something in /etc/X11/xorg.conf ? Thank you in advance, rr

  2. #2
    Senior Member registered user
    Join Date
    Dec 2009
    Posts
    423

    Unhappy

    [there is a emoticon on top which I can't remove]

    There are two ways to go about this, as you have noted, one is to modify /etc/X11/xorg.conf. Because knoppix xorg.conf is script generated, you will have understand the needed syntax and as well as understand which script is the one generating it.

    Alternatively, this is what I would do it. Firstly make sure you have this program 'synclient', check that it exists :-

    Code:
            $ synclient -l
    ( this will list all the available settings ).

    If it does not exist, you would have to install xserver-xorg-input-synaptic.
    After that go to /etc/X11/Xsession.d and add a file say '15x11-synaptics' with this content :-
    Code:
    #
    synclient "TapButton1=1"
    That's all which is needed. After you restarted Xserver, tap-to-click will be working.
    Last edited by kl522; 09-27-2010 at 10:59 PM.

  3. #3
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    512
    @kl522
    Thank you for providing this valuable information.

    I use the command
    Code:
    synclient TapButton1=1 TapButton2=3 TapButton3=2
    to enable tapping with two and three fingers. Tapping with two fingers is set to button 3 because clicking with the right button is more often than clicking with the middle button.

  4. #4
    Junior Member
    Join Date
    Sep 2010
    Posts
    8
    thanks, it works

  5. #5
    Senior Member registered user
    Join Date
    Dec 2009
    Posts
    423
    You are fully justified to use tap-to-click on a system without keyboard and mouse.

    I use touchpad on a typical notebook, personally I consider tap-to-click a nuisance.

    However I do this :-

    synclient "HorizEdgeScroll=1"

    to allow me to use horizontal scroll on the edge of the touchpad.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Seagate 10TB 7200RPM 12Gbps 3.5in SAS Hard Drive ST10000NM096 picture

Seagate 10TB 7200RPM 12Gbps 3.5in SAS Hard Drive ST10000NM096

$79.99



WD Green SATA HDD - 3TB picture

WD Green SATA HDD - 3TB

$59.99



Seagate Barracuda ST10000DM005 10TB 256MB SATA 6Gb/s 3.5

Seagate Barracuda ST10000DM005 10TB 256MB SATA 6Gb/s 3.5" Internal Hard Drive

$153.99



WD 2TB Certified Refurbished Elements, External Hard Drive - RWDBU6Y0020BBK-WESN picture

WD 2TB Certified Refurbished Elements, External Hard Drive - RWDBU6Y0020BBK-WESN

$49.99



HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5

HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601

$79.99



Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5

Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive

$93.88



Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5

Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive

$99.99



Seagate Exos 7E10 ST2000NM000B 2TB 7200RPM SATA 6.0Gb/s 3.5

Seagate Exos 7E10 ST2000NM000B 2TB 7200RPM SATA 6.0Gb/s 3.5" Internal Hard Drive

$29.99



HGST 0F27352 10TB 3.5

HGST 0F27352 10TB 3.5" SAS 7200 RPM 12Gb/s Hard Drive 100% #73 v

$65.00



Western Digital WD10JUCT 1TB 2.5

Western Digital WD10JUCT 1TB 2.5" SATA 3Gb/s 5400 RPM 16MB Laptop Hard Drive

$17.98